Computer - Parts Computer - Parts

Peripherals - Monitors Peripherals - Monitors

Gaming - Sound - Smartphone Gaming - Sound - Smartphone

Estimated delivery time 2-6 days

BinTec R3002 VPN gateway, 5-ports, Gigabit Ethernet DSL, rack-mountable

Εγγύηση2 χρόνια
Funkwerk, 4044763004598
552.22 
(Περιλαμβάνει ΦΠΑ)
5510000211
2 χρόνια
Μη Διαθέσιμο
Στα αγαπημένα

Funkwerk 5510000211 BinTec R3002 VPN gateway, 5-ports, Gigabit Ethernet DSL, rack-mountable

BinTec R3002 VPN gateway, 5-ports, Gigabit Ethernet DSL, rack-mountable

Funkwerk R3002. Ethernet LAN features: 10Base-T/100Base-TX/1000Base-T, 1000 Mbit/s. DSL features: ADSL. Networking: Ethernet, Fast Ethernet, Gigabit Ethernet, 32 user(s), Wired. Protocols: OSPF, RIP, BGP4, IGMP, PIM SM,, HTTP, SNMP, ISDN, IPSec, RADIUS, TACACS+, PPP/MLPPP, DYN DNS, IPoA, . Connectivity: RJ-11. Security: NAT, PAT, WPA-AES,802.1x RADIUS. Certificates: IEEE 802.1p, R&TTE 1999/5/EG; EN 55022; EN 55024 + EN 55024/A1; EN61000-3-2; EN61000-3-3; . Energy management: 15 W. Environmental conditions: 0 - 40 °C, -10 - 70 °C. Weight & dimensions: 1U, 485.6 x 45 x 220 mm, 2600 g. Colour: Red

The bintec R3002 is a powerful and, thanks to its comprehensive equipment, flexible VPN gateway. The integrated ADSL 2+ modem on the R3002 supports Annex B (ADSL over ISDN), which is predominantly used in Germany, as well as the international Annex A (ADSL over POTS) and its extension Annex M making it suitable for use in many countries.
With its 19-inch metal housing and highly efficient internal ... The bintec R3002 is a powerful and, thanks to its comprehensive equipment, flexible VPN gateway. The integrated ADSL 2+ modem on the R3002 supports Annex B (ADSL over ISDN), which is predominantly used in Germany, as well as the international Annex A (ADSL over POTS) and its extension Annex M making it suitable for use in many countries.
With its 19-inch metal housing and highly efficient internal switched-mode power supply the gateway guarantees long-term reliability in critical corporate applications. This makes the R3002 ideal for use as a VPN gateway in SMEs and company head offices. The device has five Gigabit Ethernet ports, which can be configured for LAN, WAN or DMZ, and comes with a licence for ten hardware-accelerated IPSec tunnels. Up to 100 additional IPSec tunnels can also be enabled if licensed. The built-in ISDN BRI interface can be used as a remote configuration access and as an ISDN backup interface.

Using functions flexibly

Only a few functions are required to forward data between two networks. Bintec gateways have features that go far beyond just routing and allow it to be seamlessly integrated into complex IT infrastructures.
As routing protocols, you can use RIP, OSPF or the Multicast routing protocol PIM-SM for example, and the comprehensive multicast support makes the device ideal for use in multimedia and streaming applications.
Even the basic equipment of the bintec R3002 provides a SIP application level gateway (ALG) for the direct connection of IP telephones in the network or for registering with a VoIP provider. The ALG automatically controls the internal firewall making it easier to configure your VoIP solution.
Thanks to the integrated quality of service, you can prioritise VoIP traffic over normal internet traffic, for example, and thereby always ensure sufficient bandwidth for your IP voice connections. Alternatively you can give normal data traffic priority over e-mail traffic. The DNS proxy function supports the LAN for address implementation and the automated IP configuration of PCs is carried out over an integrated DHCP server.
Remote CAPI is available for the joint use of various ISDN services.

Comprehensive IPSec implementation

The IPSec implementation integrated in bintec R3002 works not only with preshared keys but also with certificates. This allows a public key infrastructure to be created for maximum security. (The German Federal Office for Information Security also recommends the use of certificates.)
Furthermore, the bintec IPSec implementation offers support when creating VPN connections with dynamic IP addresses: Even small branch offices can be reached without having to be permanently online. If both VPN nodes only have dynamic IP addresses, confidential information can continue. The exchange of IP addresses is carried out either over dynamic DNS providers or directly over an ISDN connection. The actual dynamic IP address is transferred either free of charge in the ISDN D-channel or, if this is not possible, in the B-channel (at cost).
By using IKE Config mode and the bintec IPSec multi user this offers the opportunity to create and manage IPSec dial-in solutions for multiple clients with minimal expense and IKE X-Auth (extended authentication) allows a connection to be secured with a one time password and thus with the highest level of security.

Load Balancing/Redundancy

In addition to the integrated ADSL modem, bintec R3002 offers the option to use two or even three Ethernet interfaces as additional WAN interfaces with external DSL modems or cable modems. As a result, there is not only more bandwidth available, but there is the opportunity to spread data traffic across individual WAN connections according to load or data type. Equally, you can use an additional WAN connection (e.g. SDSL) for the VPN connection of branch offices and use the integrated ADSL 2+ modem to guarantee the company's other data traffic.
Our bintec router redundancy protocol (BRRP) allows two devices to be operated so that they act as a single device in the LAN. Both devices have their own IP and MAC addresses for each interface as well as a joint virtual IP and MAC address. This is registered as the standard gateway for all computers in the LAN. Both of the switched gateways communicate over the bintec protocol and if either device fails, the other device automatically takes over the entire data traffic.

Simple configuration and maintenance

The gateway is configured over the Funkwerk Configuration Interface (FCI), using the integrated configuration wizards for example. The FCI is a web-based graphic user surface that you can use from any PC with an up-to-date Web browser via an HTTP or encrypted HTTPS connection. It also offers the opportunity to manage the devices locally and remotely over other configuration accesses such as Telnet, SSH and ISDN login.

DIME Manager from Funkwerk Enterprise Communications (FEC) is a free tool for managing FEC devices.
Dime Manager is aimed at administrators who manage networks with up to 50 devices. The software simplifies the management and configuration of gateways or access points either individually or in logical groups.
When developing DIME Manager, simple and efficient operation was the primary aim. It allows, for example, software updates to be applied to individual devices or groups of devices simply by drag and drop. DIME Manager recognises and manages new devices in the network using SNMP multicasts, in other words independent of their current IP address.

Ethernet LAN features
Ethernet LAN connection Yes
Cabling technology 10Base-T/100Base-TX/1000Base-T
Ethernet LAN data transfer rates 1000 Mbit/s
Wireless LAN features
Wireless LAN (WLAN) connection No
DSL features
DSL connection type ADSL
DSL specification ADSL: (ITU G.992.1 Annex B, ISDN), G.Lite (ITU G.922.2); ADSL2 (ITU G.992.3, ITU G.992.5 Annex B), ADSL2+
Networking
Networking features Ethernet, Fast Ethernet, Gigabit Ethernet
Number of users 32 user(s)
Connectivity technology Wired
Protocols
Routing protocol OSPF, RIP, BGP4, IGMP, PIM SM,
Management protocols HTTP, SNMP, ISDN, IPSec, RADIUS, TACACS+
Supported network protocols PPP/MLPPP, DYN DNS, IPoA,
DHCP client Yes
DHCP server Yes
Management features
Web-based management Yes
Reset button Yes
Quality of Service (QoS) support Yes
Connectivity
Ethernet LAN (RJ-45) ports quantity 5
DC-in jack Yes
WAN port RJ-11
Security
Firewall security NAT, PAT
Security algorithms supported WPA-AES, 802.1x RADIUS
MAC address filtering No
VPN tunnels quantity 10
Certificates
Networking standards IEEE 802.1p
Certification R&TTE 1999/5/EG;
EN 55022;
EN 55024 + EN 55024/A1;
EN61000-3-2;
EN61000-3-3;
EN 61000-4-4;
EN 60950-1;
EN 300 328
Energy management
Power consumption 15 W
Environmental conditions
Operating temperature range (T-T) 0 - 40 °C
Storage temperature range (T-T) -10 - 70 °C
Non-operating relative humidity (non-condensing) 10 - 95 %
Weight & dimensions
Form factor 1U
Dimensions W x D x H 485.6 x 45 x 220 mm
Weight 2600 g
Illumination/Alarms
Power LED Yes
Colour
Colour of product Red
Packaging content
Cables included 1x Ethernet cable - 3m
1x Power cable
1x Serial cable (mini USB - DSUB 9 FM)
1x ADSL cable (RJ45-RJ11) - 2m
1x ADSL cable (RJ45-RJ45) - 2m
1x ISDN (BRI/S0) cable - 3m
Quick start guide Yes

BinTec R3002 VPN gateway, 5-ports, Gigabit Ethernet DSL, rack-mountable

General:
5-Port

Χαρακτηριστικά

Manufacturer:
Funkwerk
Product Code:
W000443
EAN Code:
4044763004598

Δεν βρέθηκαν δημοσιεύσεις

Γράψτε μια κριτική

Προϊόντα από την ίδια κατηγορία