Allied Telesis 990-001045-20 Allied Telesis AT-MC1004-20 1000T to 1000SX/SC
Allied Telesis AT-MC1004-20 1000T to 1000SX/SCOverview
The AT-MC1004 Ethernet media converter is designed to extend the distance of your network by interconnecting LAN devices that are physically separated by large distances.These media converters have the functionality to connect any managed/unmanaged 1000Mbps 1Gbps switch or hub using standard 1000T RJ-45 connections and convert the signal to a 1000SX port.
Extend the Distance of Ethernet
For the AT-MC1004, the fiber optic port has a fixed multi-mode fiber 1000SX SC connector
and a maximum operating distance of 550m.
Although the provisioning of Gigabit Ethernet connections is becoming relatively inexpensive, thanks in part to the availability of lower-cost copper Gigabit network adapters, the distance limitations of copper cabling make fiber
segments a necessity in most networks. Small, comparatively inexpensive copper to fiber
Gigabit Ethernet media converters present a simple and very cost-effective way of connecting
Gigabit Ethernet LANs over extended distances.
Standalone or Rack-mounted
Each small media converter is powered by an external power supply unit for use in standalone
applications. Where multiple media converters are used, up to 12 standalone devices can be
inserted into a low-cost AT-MCR12 rack-mount chassis, allowing all the converters to be
powered by a single internal power supply. In critical applications, a second load sharing
internal power supply can be installed into the rack-mount chassis.
|Data transfer rate max:||1000 Mbit/s|
|Maximum transfer distance:||550 m|
|Dimensions WxDxH:||105 x 95 x 25 mm|
|Operating temperature range T-T:||0 - 40 °C|
|Storage temperature range T-T:||-25 - 70 °C|
|Operating relative humidity range:||5 - 95 %|
|Operating altitude:||0 - 3000 m|
|Certification:||EN 60950, UL 60950, CE, EN 60825|
|Compliance industry standards:||IEEE 802.3, IEEE 802.3u, IEEE 802.3ab|
Allied Telesis AT-MC1004-20 1000T to 1000SX/SC
No posts found