Computer - Parts Computer - Parts

Peripherals - Monitors Peripherals - Monitors

Estimated delivery time 2-6 days

APC Smart-UPS 1500 LCD - UPS ( rack-mountable ) - AC 230 V - 1 kW - 1500 VA - RS-232, USB - 4 Output Connector(s) - 2U

Warranty2 Years
APC, 0731304284758
984.42 
(Including VAT)
SMT1500RMI2U
2 Years
22 item(s)
+
Add to wish list

APC SMT1500RMI2U APC Smart-UPS 1500 LCD - UPS ( rack-mountable ) - AC 230 V - 1 kW - 1500 VA - RS-232, USB - 4 Output Connector(s) - 2U

APC Smart-UPS 1500 LCD - UPS ( rack-mountable ) - AC 230 V - 1 kW - 1500 VA - RS-232, USB - 4 Output Connector(s) - 2U

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Audible alarms
Provide notification of changing flywheel conditions

InfraStruXure Central compatible
Enables centralized management via APC InfraStruXure® Central.

SmartSlot
Customize UPS capabilities with management cards.

Cold-start capable
Provides temporary battery power when the utility power is out.

Serial Connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.

Resettable circuit breakers
Enables a quick recovery from overload events.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Audible alarms
Provides notification of changing utility power and UPS conditions.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Serial Connectivity
Provides management of the UPS via a serial port.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Network manageable
Provides remote management of the UPS over the network.

Adjustable voltage sensitivity
Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.

Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Energy management
Output power capacity (VA) 1500 VA
Output power 1000 W
Nominal input voltage 230 V
Nominal output voltage 230 V
Power supply input frequency 50 - 60, 50/60 Hz
Surge energy rating 459 J
Emergency Power Off (EPO) Yes
Connectivity
Serial ports quantity 1
Number of output IEC jumpers 2
Ethernet LAN (RJ-45) ports quantity 1
USB 2.0 ports quantity 1
Technical details
Rack mounting 2U
Overload protection Yes
Surge protection Yes
Battery
Battery technology Sealed Lead Acid
Battery recharge time 3 h
Hot-swap battery Yes
Colour
Colour of product Black
Weight & dimensions
Weight 28640 g
Width 432 mm
Depth 457 mm
Height 89 mm
Environmental conditions
Operating temperature range (T-T) 0 - 40 °C
Storage temperature range (T-T) -15 - 45 °C
Operating relative humidity range 0 - 95 %
Storage relative humidity range 0 - 95 %
Operating altitude 0 - 3000 m
Non-operating altitude 0 - 15000 m
Certificates
Certification RoHS 7b Exemption, REACH: Contains No SVHCs
Illumination/Alarms
LED indicators Yes
Audible alarms Yes
Sound emission
Noise level 46 dB
Packaging data
Package dimensions (WxDxH) 594 x 603 x 251 mm
Package weight 31910 g
Display
Display LCD TFT
Other features
Interface RJ-45 Serial, SmartSlot, USB
Output connections 4 x IEC 320 C13
2 x IEC Jumpers
Input connection type IEC-320 C14

APC Smart-UPS 1500 LCD - UPS ( rack-mountable ) - AC 230 V - 1 kW - 1500 VA - RS-232, USB - 4 Output Connector(s) - 2U

More Details

Manufacturer:
APC
Product Code:
2709144
EAN Code:
0731304284758

No posts found

Write a review

Products from Same Category