Computer - Parts Computer - Parts

Peripherals - Monitors Peripherals - Monitors

Estimated delivery time 2-6 days

Cisco Third-Generation 4-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card

Warranty2 Years
Cisco, 0882658359293
4,292.01 
(Including VAT)
VWIC3-4MFT-T1/E1=
2 Years
Out of stock
Add to wish list

Cisco VWIC3-4MFT-T1/E1= Cisco Third-Generation 4-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card

Cisco Third-Generation 4-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card

These flexible interface cards support multiple integrated data, voice and video applications, facilitating the migration from data only as well as circuit-switched voice/video services to a packet voice/video solution

Introduction
The Cisco Third-generation 1-, 2-port and 4-port T1/E1 Multiflex Trunk Voice/WAN Interface MFT VWIC3s support data and voice applications on the Cisco 1921, 1941 and 1941W data only, and the Cisco 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E Integrated Services Routers. The Cisco MFT VWIC3 combines WAN-interface-card WIC and voice-interface-card VIC functions to provide unparalleled flexibility, versatility, and investment protection through its many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface because the Cisco MFT VWIC3 cards can be reused in packet voice applications. The 2 port T1/E1 MFT VWIC3 is shown below.

The Cisco MFT VWIC3 interface cards add improvements over the Cisco Second-generation 1- and 2-port T1/E1 Multiflex Voice/WAN Interface Cards MFT VWIC2s. The Cisco 2- and 4-port MFT VWIC3s enable each port to be clocked from an independent clock source for data applications. Voice applications can now be clocked independently from data applications, with all ports for voice applications clocked from a single source. The Cisco MFT VWIC3s use the ECAN on the motherboard PVDM cards with up to 128ms echo-tail length for demanding network conditions. MFT VWIC3 cards support up to 2 channel groups per T1/E1 port for serial data applications. Refer to Table 3 for all configuration options offered with the MFT VWIC3 cards.

The Cisco MFT VWIC3 cards can be inserted into the EHWIC slot on the supported Cisco 1921, 1941, 1941W, 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E integrated services routers. The T1/E1 MFT VWIC3 cards support both T1 and E1, providing additional flexibility in configuring the Cisco MFT VWIC3s for supporting T1, fractional T1, E1, and fractional E1 for both voice and WAN applications. All MFT VWIC3 modules include the drop-and-insert multiplexing capability, which eliminates costly external third-party channel service units/data service units CSUs/DSUs and drop-and-insert multiplexers.

The Cisco MFT VWIC3 cards are offered in single-, dual- and quadruple-port versions, which can be used and then redeployed as network requirements change, thereby addressing several applications:

- T1/E1 data: The Cisco 1-, 2- and 4-port T1/E1 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1, including structured G.703 with G.704 framing, fractional E1, and E1structured G.703 applications. To simplify remote management, these MFT VWIC3 cards integrate a fully managed DSU/CSU for T1 deployments and a fully managed DSU for E1 deployments.

- E1/G.703 data: The Cisco 1- and 2- port G.703 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1 including structured G.703 with G.704 framing, fractional E1, and unstructured E1 G.703 applications. To simplify remote management, the G.703 version includes a fully managed DSU. The G.703 versions also support all the capabilities on the T1/E1 versions.

- T1/E1 packet voice: The Cisco 1-, 2- and 4-port T1/E1 MFT VWIC3 voice and WAN versions act as a VIC, supporting packet voice applications by providing T1, fractional T1, E1, and fractional E1 connections to private branch exchanges PBXs and central offices, thereby enabling new services and reducing voice and fax toll charges.

- Mixed data and packet voice: The Cisco MFT VWIC3 interface cards can simultaneously support both data and voice, reducing the complexity and number of network components and facilitating a graceful migration to bandwidth-efficient packet voice.

- Mixed data and packet voice with drop and insert: The Cisco MFT VWIC3 cards can be deployed as a T1/E1 drop-and-insert multiplexer with integrated DSUs/CSUs, reducing the complexity of the network and the cost of the central-office ports by efficiently combining time-division multiplexing TDM voice PBX, IP voice, and data on the same trunks. Cisco 1900, 2900 and 3900 ISR routers support drop and insert between ports over a single MFT VWIC3 card and two ports over two different MFT VWIC3s

Feature list

Connectivity technology: Wired
Host interface: PCI
Connection to PC: Y
Interface: Ethernet
Internal: Y
Ethernet LAN RJ-45 ports quantity: 4
Data transfer rate max: 2048 Mbit/s
Chipset: -
Ethernet LAN connection: Y
Cabling technology: 10/100BaseTX
Networking standards: IEEE 802.3
Colour of product: Green,Metallic
Width: 782 mm
Depth: 1204 mm
Height: 191 mm
Weight: 95 g
LED indicators: Y
Safety: UL 60950, CAN/CSA C22.2 No. 60950, IEC 60950-1, EN 60950-1, AS/NZS 60950
Operating temperature range T-T: 0 - 40 °C
Storage temperature range T-T: -25 - 70 °C
Operating relative humidity range: 5 - 95 %

Cisco Third-Generation 4-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card

More Details

Manufacturer:
Cisco
Product Code:
677L371
EAN Code:
0882658359293

No posts found

Write a review