Computer - Parts Computer - Parts

Peripherals - Monitors Peripherals - Monitors

Estimated delivery time 2-6 days

LANCOM IAP-322 Radio access point 802.11 a/b/g/n Dual Band

Warranty2 Years
Lancom Systems, 4044144613883
(Including VAT)
2 Years
Out of stock
Add to wish list

Lancom Systems 61388 Lancom Systems LANCOM IAP-322, ACCESS POINT (61388)

Lancom Systems LANCOM IAP-322, ACCESS POINT (61388)

With the LANCOM IAP-322 high-performance WLAN structures can be extended to logistics areas such as warehouses or other roofed outdoor areas. Thanks to the robust full metal housing the device is resistant against dust as occurring in warehouses. The LANCOM IAP-322 is designed to meet any demands in the industry even with regard to its power supply: It can both be operated with the supplied wall plug transformer 230V/12V and comfortably via PoE based on IEEE 802.3af. Additionally, a multi power supply with 10-28V is available in order to connect the device according to the required conditions on-site. The device can even be installed on forklifts and can hence be used for supporting the automatic stocktaking or for locating the vehicle. Due to the implementation of appropriate electronic components, the device can also be applied in sub-zero temperatures and thus also during winter times in unheated warehouses, sport arenas or ice stadiums without interruption. Professional software features such as Band Steering and Spectral Scan contribute to a reliable WLAN operation even in difficult and high-density radio environments.

Feature list

Data transfer rate max: 1000 Mbit/s
Ethernet LAN data rates: 10, 100, 1000 Mbit/s
Wi-Fi data rate max: 300 Mbit/s
Frequency band: 2.4/5 GHz
Modulation: OFDM
Receiver sensitivity: 2.4 GHz:802.11b: -91 dBm @ 11 Mbps, -96 dBm @ 1 Mbps; 802.11g: -96 dBm @ 6 Mbps, -83 dBm @ 54 Mbps; 802.11n: -96 dBm @ 6,5 Mbps MCS0, 20MHz, -79 dBm @ 65 Mbps MCS7, 20 MHz; -93 dBm @ 13 Mbps MCS8, 20 MHz, -77 dBm @ 130 Mbps MCS15, 20 MHz; -90 dBm @ 15 MbpsMCS0, 40 MHz, -75 dBm @ 150 Mbps MCS7, 40 MHz; -90 dBm @ 30 Mbps MCS8, 40 MHz, -73 dBm @ 300 Mbps MCS15, 40 MHz5 GHz:802.11a/h: -95 dBm @ 6 Mbps, -82 dBm @ 54 Mbps; 802.11n: -95 dBm @ 6,5 Mbps MCS0, 20 MHz, -77 dBm @ 65 Mbps MCS7, 20 MHz; -94dBm @ 13 Mbps MCS8, 20 MHz, -74 dBm @ 130 Mbps MCS15, 20 MHz; -91 dBm @ 15 Mbps MCS0, 40 MHz, -75 dBm @ 150 Mbps MCS7,40 MHz; -90 dBm @ 30 Mbps MCS8, 40 MHz, -71 dBm @ 300 Mbps MCS15, 40 MHz
Channel bandwidth: 20 MHz
Web-based management: Y
Quality of Service QoS support: Y
VLAN support: Y
Networking standards: IEEE 802.11a, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u
Reset button: Y
Firmware upgradeable: Y
Certification: EN 60950-1, EN 301 489-1, EN 301 489-17UL-2043EN 300 328EN 301 893
Management protocols: Telnet/SSL, SSH, HTTP/HTTPS, TFTP, SNMP, MIB, MIB II
Supported network protocols: IPv4/IPv6
DHCP client: Y
DHCP server: Y
Routing protocols: RIP-1, RIP-2
WAN connection: Ethernet RJ-45
DC-in jack: Y
Ethernet LAN RJ-45 ports: 1
Authentication method: RADIUS, RADSEC, TACACS
MAC address filtering: Y
Antenna type: External
Antenna connector type: SMA
Antenna gain level max: 5 dBi
Antennas quantity: 4
Detachable antennas: Y
Power consumption typical: 12 W
Input voltage: 10 - 28 V
Power over Ethernet PoE support: Y
Internal: N
LED indicators: Y
Operating relative humidity H-H: 0 - 95 %
Operating temperature T-T: -20 - 50 °C
Width: 148 mm
Depth: 207 mm
Height: 44 mm
Cables included: LAN RJ-45
Safety: IP50

Lancom Systems LANCOM IAP-322, ACCESS POINT (61388)

More Details

Lancom Systems
Product Code:
EAN Code:

No posts found

Write a review

Products from Same Category