LevelOne FVT-0104TXFC LevelOne 10/100BASE-TX TO 100BASE-FX SM (FVT-0104TXFC)LevelOnes FVT-0103TXFC and FVT-0104TXFC are new Power-over-Ethernet-converters that transfer data from 10/100BaseTX copper tofiber interfaces. These POE Converters are designed to receive dataand power from POE networks and then to refer data out throughfiber connections thus eliminating extra power cables to extend theusefulness of the network
LevelOnes POE converter complies with IEEE802.3af standard. The10/100 Base-TX port auto-senses 10 or 100Mbps connection speeds,auto-negotiates half-/full-duplex modes, and auto-selects MDI-Xmedia type. It comes in two models: FVT-0103TXFC with Multi-modeSC connector and FVT-0104TXFC with Single-mode SC connector.These converters will give your POE network the ability to interfacewith fiber connections over a distance of up to 20km.
With its compact design, our POE converters easily fit on any limitedspace. No software is required. You can easily active this device bysimply connecting it to the network cable and its ready to go.
-10/100Base-TX UTP to 100Base-FX fiber media conversion.
-Complies with IEEE 802.3af POE standard.
-Over-currant protection and Under-currant detection.
-Choice of SC connectors for multi- and single-mode.
-DIP Switch to set configurations.
|Data transfer rate max:||100 Mbit/s|
|Maximum transfer distance:||20000 m|
|Operating temperature T-T:||0 - 50 °C|
|Operating relative humidity H-H:||5 - 90 %|
|Data link protocols:||IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE802.3x|
|Dimensions WxDxH:||70.3 x 94 x 26.2 mm|
|Connectors:||10/100Base-TX: STP RJ-45; 100Base-FX: MM SC, SM SC|
|Packet transfer speed:||100Mbps: 148800 pps; 10Mpbs: 14880 pps|
|Fiber type:||8.3/125, 8.7/125, 9/125, 10/125 µm|