Funkwerk 5510000212 R3502 GATEWAY 19IN RACK
R3502 GATEWAY 19IN RACKThe modern VPN gateway with VDSL 2 modem
The R3502 VPN gateway is ideal for use at SMEs and corporate headquarters that require enhanced performance and greater bandwidth thanks to its VDSL2 modem.
The bintec R3502 is a powerful and, thanks to its comprehensive equipment, flexible VPN gateway. The integrated VDSL2 modem on the R3502 supports the asymmetric band plan 998, which is used in Germany and the majority of European countries, including the corresponding profiles 8b and 17a. The modem also supports automatic switching to ADSL2. This increases your investment security, as you initially operate the device on an ADSL connection and can then subsequently switch to a VDSL connection depending on availability.
With its 19-inch metal housing and highly efficient internal switched-mode power supply the gateway guarantees long-term reliability in critical corporate applications. This makes the R3502 ideal for use as a VPN gateway in SMEs and company head offices. The device has five Gigabit Ethernet ports, which can be configured for LAN, WAN or DMZ, and comes with a licence for ten hardware-accelerated IPSec tunnels. Up to 100 additional IPSec tunnels can also be enabled if licensed. The built-in ISDN BRI interface can be used as a remote configuration access and as an ISDN backup interface.
Using functions flexibly
Only a few functions are required to forward data between two networks. Bintec gateways have features that go far beyond just routing and allow it to be seamlessly integrated into complex IT infrastructures.
As routing protocols, you can use RIP, OSPF or the Multicast routing protocol PIM-SM for example, and the comprehensive multicast support makes the device ideal for use in multimedia and streaming applications.
Even the basic equipment of the bintec R3502 provides a SIP application level gateway ALG for the direct connection of IP telephones in the network or for registering with a VoIP provider. The ALG automatically controls the internal firewall making it easier to configure your VoIP solution.
Thanks to the integrated quality of service, you can prioritise VoIP traffic over normal internet traffic, for example, and thereby always ensure sufficient bandwidth for your IP voice connections. Alternatively you can give normal data traffic priority over e-mail traffic.
The DNS proxy function supports the LAN for address implementation and the automated IP configuration of PCs is carried out over an integrated DHCP server.
Remote CAPI is available for the joint use of various ISDN services.
Comprehensive IPSec implementation
The IPSec implementation integrated in bintec R3502 works not only with preshared keys but also with certificates. This allows a public key infrastructure to be created for maximum security. The German Federal Office for Information Security also recommends the use of certificates.
Furthermore, the bintec IPSec implementation offers support when creating VPN connections with dynamic IP addresses: Even small branch offices can be reached without having to be permanently online. If both VPN nodes only have dynamic IP addresses, confidential information can continue. The exchange of IP addresses is carried out either over dynamic DNS providers or directly over an ISDN connection. The actual dynamic IP address is transferred either free of charge in the ISDN D-channel or, if this is not possible, in the B-channel at cost.
By using IKE Config mode and the bintec IPSec multi user this offers the opportunity to create and manage IPSec dial-in solutions for multiple clients with minimal expense and IKE X-Auth extended authentication allows a connection to be secured with a one time password and thus with the highest level of security.
In addition to the integrated VDSL modem, bintec R3502 offers the option to use two or even three Ethernet interfaces as additional WAN interfaces with external DSL modems or cable modems. As a result, there is not only more bandwidth available, but there is the opportunity to spread data traffic across individual WAN connections according to load or data type. Equally, you can use an additional WAN connection e.g. SDSL for the VPN connection of branch offices and use the integrated VDSL2 modem to guarantee the company's other data traffic.
Our bintec router redundancy protocol BRRP allows two devices to be operated so that they act as a single device in the LAN. Both devices have their own IP and MAC addresses for each interface as well as a joint virtual IP and MAC address. This is registered as the standard gateway for all computers in the LAN. Both of the switched gateways communicate over the bintec protocol and if either device fails, the other device automatically takes over the entire data traffic.
Simple configuration and maintenance
The gateway is configured over the Configuration Interface FCI, using the integrated configuration wizards for example. The FCI is a web-based graphic user surface that you can use from any PC with an up-to-date Web browser via an HTTP or encrypted HTTPS connection. It also offers the opportunity to manage the devices locally and remotely over other configuration accesses such as Telnet, SSH and ISDN login.
In addition the R3502 offers the option of the Teldat WLAN Controller.
The Teldat WLAN Controller allows the configuration and monitoring of small and medium sized WLANs with up to 72 access points.
Whether it is for frequency management which automatically determines the radio channels, for the support of virtual LANs or for the management of virtual radio networks Multi SSIDthe WLAN Controller offers easy control over all advanced features. Our software continuously monitors the entire wireless LAN and immediately reports outages and security risks.
DIME Manager from Teldat is a free tool for managing Teldat devices.
Dime Manager is aimed at administrators who manage networks with up to 50 devices. The software simplifies the management and configuration of gateways or access points either individually or in logical groups.
When developing DIME Manager, simple and efficient operation was the primary aim. It allows, for example, software updates to be applied to individual devices or groups of devices simply by drag and drop. DIME Manager recognises and manages new devices in the network using SNMP multicasts, in other words independent of their current IP address.
|Ethernet LAN data rates:||10, 100, 1000 Mbit/s|
|WAN connection:||ADSL RJ-11, Ethernet RJ-45|
|Ethernet LAN RJ-45 ports:||5|
|USB ports quantity:||1|
|DSL connection type:||VDSL|
|Networking standards:||IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u|
|Supports ISDN connection:||Y|
|Routing protocols:||OSPF, RIP-1, RIP-2|
|Management protocols:||Telnet, HTTP, SNMP, SSL, SSH|
|Quality of Service QoS support:||Y|
|Firewall security:||SIF, NAT/PAT|
|Authentication method:||802.1x RADIUS, TACACS|
|Security algorithms:||128-bit AES, 192-bit AES, 256-bit AES, 3DES, 802.1x RADIUS, DES, HTTPS, SHA-1, SSH, SSH-2, SSL/TLS|
|VPN tunnels quantity:||10|
|VPN support:||IPSec, PPP/PTPP, GRE|
|Colour of product:||Black, Red|
|AC input voltage:||110-240 V|
|Power over Ethernet PoE support:||N|
|Operating temperature T-T:||0 - 40 °C|
|Storage temperature T-T:||-10 - 70 °C|
|Operating relative humidity H-H:||10 - 95 %|
|Cables included:||LAN RJ-45, Serial|
|Quick start guide:||Y|
R3502 GATEWAY 19IN RACK
No posts found