APC Smart-UPS X 750 Rack/Tower LCD / UPS (rack-mountable) / AC 230 V / 600 Watt / 750 VA / output connectors: 8 / 2U / black | SMX750I

Product Features

• EPO
  Attach the device to an emergency power off (EPO) system so that power can be turned off in an emergency situation.
• Green mode
  Green mode bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• High frequency design
  Reduces or eliminates bulky transformers resulting in lighter units for ease of handling.
• Energy meter
  Provides actual kilowatt hours of usage for energy conscious users.
• Intuitive LCD interface
  Provides clear and accurate information with the ability to configure the UPS locally with easy to use navigation keys.
• Auto recognition of external batteries
  UPS recognizes when external battery packs are attached and automatically adjusts runtime.
• Multiple switched outlet groups
  Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on / off and non-critical load shedding.
• Pure sine wave output on battery
  Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
• Scalable run time
  Scalable run time allows additional run time to be quickly added as needed.
• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Plug-and-Play external batteries
  Ensure clean, uninterrupted power to the loads when adding extra runtime to the UPS.
• Rack / tower convertible
  Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
• SmartSlot
  Customize UPS capabilities with management cards.
• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Power conditioning
  Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• Network manageable
  Provides remote power management of the UPS over the network.
• Audible alarms
  Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
• Serial connectivity
  Provides management of the UPS via a serial port.
• Hot-swappable batteries
  Ensure clean, uninterrupted power to protected equipment while batteries are being replaced.
• Predictive failure notification
  Provides early-warning fault analysis ensuring proactive component replacement.
• Resettable circuit breakers
  Enable a quick recovery from overload events.
• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

Special Features

• EPO
• Green mode
• High frequency design
• Energy meter
• Intuitive LCD interface
• Auto recognition of external batteries
• Multiple switched outlet groups
• Pure sine wave output on battery
• Scalable run time
• Cold-start capable
• Plug-and-Play external batteries
• Rack / tower convertible
• SmartSlot
• Temperature-compensated battery charging
• Intelligent battery management
• Power conditioning
• Automatic restart of loads after UPS shutdown
• Disconnected battery notification
• Network manageable
• Audible alarms
• Serial connectivity
• Hot-swappable batteries
• Predictive failure notification
• Resettable circuit breakers
• Battery failure notification

Product Specification