LevelOne FVT-2401 LevelOne 10/100BASE-TX-100BASE-FX SMF (FVT-2401)
LevelOne 10/100BASE-TX-100BASE-FX SMF (FVT-2401)The FVT-2401 SMF SC media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100Base-TX RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T and 100Base-TX auto-sensing. Used in single-mode with fibre-optic cabling, this can extend a network range up to 40 km.
The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP Link Fault Pass-through, allowing the converter to monitor both the fiber and copper ports for signal loss, as well as converter transmission method, auto-negotiation mode for adjusting copper speed and full & half duplex mode.
The FVT-2401 is able to operate in temperatures from -10° up to 55° Celsius. The converter can be used as a standalone unit or as a slide-in module to the CHV-2000 19-inch Converter Chassis, which can accommodate up to 14 units for use in a central wiring closet.
|Data transfer rate max:||100 Mbit/s|
|Converter input interface:||100Base-TX, 10Base-T|
|Fiber optic connector:||SC|
|Networking standards:||IEEE 802.3, IEEE 802.3u, IEEE 802.3x|
|Duplex system:||Full, Half|
|Ethernet LAN data rates:||10, 100 Mbit/s|
|Ethernet interface type:||Fast|
|Converter output interface:||100Base-FX|
|Ethernet LAN RJ-45 ports:||1|
|Fiber ports quantity:||1|
|Maximum transfer distance:||40000 m|
|Fiber mode structure:||Single-mode|
|Colour of product:||Black|
|Input voltage:||5 V|
|Input current:||1 A|
|External power adapter:||Y|
|Operating temperature T-T:||-10 - 55 °C|
|Storage temperature T-T:||-40 - 75 °C|
|Operating relative humidity H-H:||5 - 90 %|