LevelOne FEP-0811 LevelOne 8-PORT FAST ETHERNET POE-PLUS (FEP-0811)- Complies with IEEE 802.3af, 802.3, 802.3u and 802.3x
- 8 x PoE ports support 15.4w power on each port to PoE Powered Device
- Each Switching port supports 10/100Mbps auto-negotiation
- Auto-MDI/MDI-X detection on each RJ-45 port
- 4K MAC address table, automatic source address learning and ageing
- 11-inch metal case with 19-inch rack mount holder
- Internal power supply
- Total PoE power budget: 123.2w
The LevelOne FEP-0811 is a high-performance 10/100Mbps Ethernet PoE Switch. All 8 of the PoE ports are powered up to 15.4w. The total PoE power budget is 123.2w. This switch automatically detects IEEE 802.3af compliant powered devices and provides power and data over a single cable. Its an ideal solution for office and home users to utilize a combination of PoE and non-PoE devices.
Flexible PoE Installation & Solution
With data and power over Ethernet from one unit, the FEP-0811 can reduce cables and eliminate the need for dedicated power outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords.
Stable and reliable network Environment
The FEP-0811 enables users to deploy a stable and reliable high-speed LAN environment, with store-and-forward switching architecture, the FEP-0811 provides a stable and reliable packet error filtering and nonblocking packet forwarding architecture. This device supports N-way auto-networking speed and duplex modes.
Easy to use
Providing 8 PoE interfaces, the FEP-0811 is ideal for small businesses and workgroups needing to deploy PoE for wireless access points, IP-based surveillance cameras or IP phones in any place easily, efficiently and cost effectively. For instant error detection, the FEP-0811 is equipped with LED Indicators to define problems on the network.
|Basic switching RJ-45 Ethernet ports quantity:||8|
|Copper ethernet cabling technology:||100BASE-TX, 10BASE-T|
|Networking standards:||IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x|
|Flow control support:||Y|
|MAC address table:||4000 entries|
|Supported data transfer rates:||10/100 Mbps|
|Switching capacity:||1.6 Gbit/s|
|LED indicators:||LAN, PoE, Y|
|Packet buffer memory:||0.204 MB|
|Power consumption typical:||123.2 W|
|Power over Ethernet PoE support:||Y|
|Operating temperature T-T:||0 - 55 °C|
|Storage temperature T-T:||-20 - 90 °C|
|Operating relative humidity H-H:||10 - 90 %|
|Storage relative humidity H-H:||5 - 95 %|
|Dimensions WxDxH:||185 x 280 x 44 mm|
|Networking features:||Fast Ethernet|