StarTech.com Industrial 2 Port Gigabit PoE+ Power over Ethernet Injector 48V / 30W - Wall-Mountable
StarTech.com POEINJ2GI StarTech.com INDUSTRIELLER 2 PORT GIGABIT (POEINJ2GI)
StarTech.com INDUSTRIELLER 2 PORT GIGABIT (POEINJ2GI)The POEINJ2GI Industrial 2 Port Gigabit PoE Injector provides power and data connectivity to up to two Gigabit PoE-compliant devices over standard Ethernet cabling at distances of up to 330ft 100m. This dual port PoE injector allows you to easily connect two PoE-powered devices PD to a non-PoE LAN switch, avoiding the cost of upgrading your switch to a PoE-enabled model.
Fully compliant with IEEE 802.3at / 802.3af, the high power PoE / PSE adapter provides two 10/100/1000Mbps ports with support for up to 50V / 600mA 30 Watt max output per port. To protect your devices from damage the injector offers intelligent detection, to verify whether the connected devices are IEEE 802.3at/af compliant. If the device is not compatible with PoE, only data will be sent through the LAN cable.
Ideal for industrial environments, the power over Ethernet injector features a rugged, IP-30 case design that is both DIN rail and wall mountable, and features an extended operating temperature range -40°C to 70°C to ensure performance in harsh environments.
|Power over Ethernet PoE:||50 V|
|Compliance industry standards:||IEEE 802.3at PoE, IEEE 802.3af PoE|
|Power requirements:||50 - 57 DC|
|Ethernet LAN data rates:||10, 100, 1000 Mbit/s|
|Ethernet interface type:||Gigabit|
|Power consumption typical:||30 W|
|Power over Ethernet PoE support:||Y|
|Ethernet LAN RJ-45 ports:||4|
|Dimensions WxDxH:||70 x 95 x 26 mm|
|Certification:||CE, FCC, RoHS|
|Operating temperature T-T:||-40 - 70 °C|
|Storage temperature T-T:||-40 - 80 °C|
|Storage relative humidity H-H:||5 - 95 %|
StarTech.com INDUSTRIELLER 2 PORT GIGABIT (POEINJ2GI)
No posts found