Cisco CISCO ASR1000 ROUTE PROCESSOR (ASR1000-RP1)

Cisco ASR1000-RP1 Cisco CISCO ASR1000 ROUTE PROCESSOR (ASR1000-RP1)

- The Cisco ASR 1000 Series Embedded Service Processors ESPs are based on the innovative, industry-leading Cisco QuantumFlow Processor for next-generation forwarding and queuing in silicon. These modules use the first generation of the hardware and software of the Cisco QuantumFlow Processor architecture.

- The 5-, 10-, 10-N- 20- and 40-Gbps Cisco ASR 1000 Series ESPs part numbers ASR1000-ESP5, ASR1000-ESP10, ASR1000-ESP10-N, ASR1000-ESP20, and ASR1000-ESP40, respectively provide five centralized forwarding-engine options for the Cisco ASR 1000 Series Aggregation Services Routers. Additionally, the Cisco ASR 1002 Fixed Router includes a nonmodular, fixed ESP with throughput of 2.5-Gbps and the ASR 1001 comes with a nonmodular, fixed ESP with throughput of 2.5-Gbps which is upgradable with a software activated performance upgrade license to 5-Gbps.

- The Cisco ASR 1000 Series 10-N-Gbps ESP ASR1000-ESP10-N is the nonencryption version of the Cisco ASR 1000 Series 10-Gbps ESP ASR1000-ESP10. The Cisco ASR 1000 Series 10-N-Gbps ESP can only support noncrypto Cisco IOS Software images and will never support encryption capabilities such as IP Security IPsec. In future releases, the Cisco ASR 1000 Series 10-N-Gbps ESP may support secured network management features such as Secure Shell SSH Protocol, Secure Sockets Layer SSL, and Simple Network Management Protocol Version 3 SNMPv3.

- The Cisco ASR 1000 Series ESPs are responsible for the data-plane processing tasks, and all network traffic flows through them. The modules perform all baseline packet routing operations, including MAC classification, Layer 2 and Layer 3 forwarding, quality-of-service QoS classification, policing and shaping, security access control lists ACLs, VPNs, load balancing, and NetFlow. They are also responsible for features such as firewalls, intrusion prevention, Network Based Application Recognition NBAR, Network Address Translation NAT, and Cisco IOS Flexible Pattern Matching.

Feature list

Ethernet LAN data rates:	10, 100, 1000 Mbit/s
Full duplex:	Y
Wi-Fi:	N
DC-in jack:	N
Networking standards:	IEEE 802.3
Management protocols:	SNMPv3
Web-based management:	Y
Quality of Service QoS support:	Y
MAC address filtering:	Y
Firewall security:	IOS
Security algorithms:	3DES, DES, SSH, WPA-AES
VPN tunnels quantity:	10000
Rack mounting:	N
Colour of product:	Multi
Internal memory:	2560 MB
Built-in processor:	ASR1000
Firmware upgradeable:	Y
Power consumption typical:	140 W
Memory and processor:	512-Mbps Cisco QuantumFlow, 2-Gbps DRAM, 10-Mbps TCAM, 128-Mbps
Compatibility:	Cisco ASR 1002, ASR 1004, ASR 1006
Operating temperature T-T:	5 - 40 °C
Storage temperature T-T:	-40 - 70 °C
Operating relative humidity H-H:	5 - 85 %
Storage relative humidity H-H:	5 - 95 %
Operating altitude:	-60 - 2000 m
Non-operating altitude:	-60 - 4000 m
Operating temperature T-T:	41 - 104 °F
Safety:	AS/NZS 60950 / IEC/EN 60950
Maximum data transfer rate:	10 Gbit/s
Dimensions WxDxH:	0.02 x 0.428 x 0.36 mm
Compatible operating systems:	Cisco IOS XE 2.1
Connectivity technology:	Wired
Connectivity LEDs:	6
Mounting:	R
I/O ports:	Cisco ASR 1000 SIP - SPA
Dimensions W x D x H:	0.92 x 16.7 x 14.19 "
Slot type:	2.5/5 - Gbps ESP

Cisco CISCO ASR1000 ROUTE PROCESSOR (ASR1000-RP1)