HP 1910-24 Switch Switch L3 Managed 24 x 10/100 + 2 x combo Gigabit SFP rack-mountable

Hewlett Packard JG538A HP 1910-24 Switch Switch L3 Managed 24 x 10/100 + 2 x combo Gigabit SFP rack-mountable

Overview
HP 1910 switches are advanced smart managed fixed-configuration Gigabit and Fast Ethernet switches designed for small businesses in an easy-to-administer solution. The series has 8 gigabit models and 5 Fast Ethernet models. The gigabit models are : 8-, 16-, 24-, and 48-port 10/100/1000 non-PoE models; and two 8-port and two 24-port 10/100/1000 PoE models. Gigabit models have additional true Gigabit SFP ports for fiber connectivity. The Fast Ethernet models are : 8-. 24- and 48- 10/100 non-PoE models and 8-, 24- 10/100 PoE models. The Fast Ethernet models come with additional 2 combo uplink ports . All HP 1910 models support rack mounting or desktop operation. Customizable features include basic layer 2 features like VLANs and link aggregation as well as advanced features such as Layer 3 static routing, IPv6, ACLs and Spanning Tree Protocols. HP 1910 switches come with a lifetime warranty covering the unit, fans, and power supplies.

Features
Management

• Simple Web management: allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http https is supported


Quality of Service QoS

• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic


Connectivity

• IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic.


Security

• Advanced access control lists ACLs: enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access


Performance

• Half-/full-duplex auto-negotiating capability on every port: doubles the throughput of every port


Layer 2 switching

• VLAN support and tagging: supports IEEE 802.1Q 4,094 VLAN IDs and 256 VLANs simultaneously


Layer 3 services

• Address Resolution Protocol ARP: determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network

Feature list

Switch layer:	L3
Switch type:	Managed
Quality of Service QoS support:	Y
Web-based management:	Y
Basic switching RJ-45 Ethernet ports quantity:	24
Basic switching RJ-45 Ethernet ports type:	Fast Ethernet 10/100
SFP ports quantity:	2
Gigabit Ethernet copper ports quantity:	2
Networking standards:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Full duplex:	Y
Port mirroring:	Y
Broadcast storm control:	Y
Rate limiting:	Y
IGMP snooping:	Y
Auto MDI/MDI-X:	Y
10G support:	N
VLAN support:	Y
Auto-sensing:	Y
MAC address table:	8192 entries
Switching capacity:	8.8 Gbit/s
Throughput:	6.6 Mpps
Latency 10-100 Mbps:	5 µs
Latency 1 Gbps:	5 µs
Access Control List ACL:	Y
SSH/SSL support:	Y
Rack mounting:	Y
Colour of product:	Grey
Form factor:	1U
Built-in processor:	MIPS @ 500 MHz
Internal memory:	128 MB
Flash memory:	32 MB
Packet buffer memory:	0.5 MB
AC input voltage:	100-240 V
AC input frequency:	50/60 Hz
Power consumption typical:	12 W
Power over Ethernet PoE support:	N
Width:	440 mm
Depth:	173 mm
Height:	44 mm
Weight:	2200 g

HP 1910-24 Switch Switch L3 Managed 24 x 10/100 + 2 x combo Gigabit SFP rack-mountable