ARCTIC Freezer 7X / Processor cooler / (for: LGA775, LGA1156, AM3, LGA1155, AM3+, FM1, FM2, LGA1150, FM2+, LGA1151, AM4, LGA1200) / aluminium fins / 92 mm | ACFRE00077A

Description

The Artic Freezer 7 X is a compact CPU cooler with one 92 mm fan. It is multi-compatible with common sockets. It benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimized for high static pressure, Artic has been able to significantly improve the cooling performance of Freezer 7X.

ARCTIC Freezer 7X / Processor cooler | ACFRE00077A

Special Features

• Longer lifespan thanks to its low coil temperature
• Offset heat pipes enable optimal heat dissipation
• More efficient and whisper quiet
• P-fan for increased performance
• Fluid dynamic bearing
• Direct-touch heat pipes

Product features

• Longer lifespan thanks to its low coil temperature
  The Freezer 7X uses a fan motor developed by Artic. This runs less audibly and more efficiently, so that the temperature of the coils is lower than with conventional motors. This increases the lifespan of the fans considerably.
• Offset heat pipes enable optimal heat dissipation
  The direct-touch heat pipes attached to the Freezer 7X and an optimized design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.
• More efficient and whisper quiet
  In addition to operating more quietly, even at maximum speed, the Freezer 7X built-in fan motor is also much more efficient.
• P-fan for increased performance
  The fan of the Freezer 7X benefits from all of the advantages of P-fans, such as high static pressure for increased cooling performance and a broad RPM range.
• Fluid dynamic bearing
  Thanks to a combination of alloy and lubricant, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.
• Direct-touch heat pipes
  The Freezer 7X uses direct-touch heat pipes. This ensures that the heat to be dissipated is transferred directly to the heat pipes without an additional material layer, and transported into the heatsink via the pipes.