Cisco AIR-CAP2702E-E-K9 Cisco 802.11AC CAP W/CLEANAIR 3X4 (AIR-CAP2702E-E-K9)The Cisco® Aironet® 2700 Series delivers the most advanced features in its class including integrated 802.11ac support ideal for adding capacity and coverage for dense indoor environments. The Aironet 2700 Series extends 802.11ac speed and features to a new generation of smartphones, tablets, and high-performance laptops that are enabled with the faster, 802.11ac Wi-Fi radios.
The Aironet 2700 series supports 802.11ac Wave 1 implementation that provides a theoretical connection rate of up to 1.3 Gbps. Thats roughly triple the rates offered by todays high-end 802.11n APs. The boost helps you stay ahead of the performance and bandwidth expectations of todays mobile worker, who usually uses multiple Wi-Fi devices instead of just one. As such, users are adding proportionally larger traffic loads to the wireless LAN, which has outpaced Ethernet as the default enterprise access network.
High Density Experience HDX.
Building on the Cisco Aironet heritage of RF excellence, the 2700 Series APs run on a purpose-built, innovative chipset with a best-in-class RF architecture. This chipset provides a high-density experience for enterprise networks designed for mission-critical, high-performance applications. The 2700 is a component of a Cisco series of flagship, 802.11ac-enabled Access Points that delivers a robust mobility experience based on the following product features:
- 802.11ac with 3x4 multiple-input multiple-output MIMO technology supporting three spatial streams. This architecture offers a sustained 1.3-Gbps rates over a greater range for more capacity and reliability than competing Access Points.
- Cross-AP Noise Reduction, a Cisco innovation that enables Access Points to intelligently collaborate in real time about RF conditions so that users connect with optimized signal quality and performance.
- Optimized AP Roaming to ensure that client devices associate with the Access Point in their coverage range that offers the fastest data rate available.
- Cisco ClientLink 3.0 technology to improve downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11ac. At the same time, the technology improves battery life on mobile devices.
- Cisco CleanAir technology enhanced with 80MHz channel support. CleanAir delivers proactive, high-speed spectrum intelligence across 20-, 40-, and 80-MHz-wide channels to combat performance problems due to wireless interference.
- MIMO equalization capabilities, which optimize uplink performance and reliability by reducing the impact of signal fade.
The Cisco Aironet 2700 Series sustains higher-speed connections farther from the AP than competing solutions. The result is up to three times greater availability of 1.3-Gbps rates in the Cisco environment for optimum mobile device performance and user experiences. It has been created specifically to take advantage of all the new speed and function of the latest Wi-Fi technology standard but at a price point that lets you ease into 802.11ac networking.
Cisco also offers the industrys broadest selection of 802.11n and 802.11ac antennas, delivering optimal coverage to different deployment scenarios.
The Cisco Aironet 2700 Series is a component of the Cisco Unified Wireless Network, a foundation for operating both wired and wireless LANs in an integrated manner. The Unified Wireless Network can scale to as many as 18,000 APs with full Layer-3 mobility across locations on the enterprise campus, in branch offices, and at remote sites. The Cisco Unified Wireless Network delivers highly secure access to mobility services and applications. It offers the lowest total cost of ownership TCO and investment protection by integrating smoothly with existing wired networks.
|Data transfer rate max:||450 Mbit/s|
|Ethernet LAN data rates:||10, 100, 1000 Mbit/s|
|Frequency band:||2.4/5 GHz|
|Flash memory:||64 MB|
|Internal memory:||512 MB|
|Networking standards:||IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3at|
|Certification:||UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1, EN 50155|
|WAN connection:||Ethernet RJ-45|
|Ethernet LAN RJ-45 ports:||1|
|Security algorithms:||EAP, EAP-TLS, EAP-TTLS, PEAP, TKIP, WPA, WPA2|
|Antenna gain level max:||6 dBi|
|Power consumption typical:||15 W|
|Input voltage:||100 - 240 V|
|Input frequency:||50 - 60 Hz|
|Power over Ethernet PoE support:||Y|
|Colour of product:||White|
|Operating relative humidity H-H:||10 - 90 %|
|Operating temperature T-T:||-20 - 50 °C|
|Storage temperature T-T:||-30 - 70 °C|