Cisco NEXUS 3548, 48 SFP+ PORTS (N3K-C3548P-10G)

Cisco N3K-C3548P-10G Cisco NEXUS 3548, 48 SFP+ PORTS (N3K-C3548P-10G)

Exceptional Performance with Flexible Deployments

Get wire-rate, layer 2 and layer 3 switching with a comprehensive feature set, including Cisco Algo Boost technology, with the lowest latency in the industry. The Cisco Nexus 3548 Switch, part of the Unified Fabric Family, is well suited for mainstream top-of-rack, ToR data center deployments. It comes in a compact, 1-rack-unit 1RU form factor.

Features and Capabilities

Algo Boost technology allows the Cisco Nexus 3548 to achieve exceptionally low latencies of 250 nanoseconds ns or less for all workloads. That includes unicast and multicast, and layer 2 and 3 switching, regardless of the features applied.

Benefits include:

- Warp mode to further reduce latency to 190 ns for small-to-midsize layer 2 and 3 deployments
- Warp SPAN to help enable stock market data delivery to trading servers in as little as 50 ns
- Active Buffer Monitoring to help you take advantage of market volatility and handle micro bursts
- Technology that supports Network Address Translation NAT for trade execution on any venue, without a latency penalty
- Embedded Remote SPAN with nanosecond timestamps to help you monitor your traffic with superior precision

Comprehensive Feature Set with Cisco Nexus Operating System NX-OS

The Cisco Nexus 3548 is powered by the data-center-class, Cisco NX-OS. Features include:

- Full-featured unicast protocols, including Border Gateway Protocol BGP, Open Shortest Path First OSPF, Enhanced Interior Gateway Routing Protocol EIGRP, and Routing Information Protocol RIP
- Multicast protocols, including Protocol Independent Multicast-Sparse Mode PIM-SM, PIM-Source-Specific Multicast PIM-SSM, and Multicast Source Discovery Protocol MSDP
- Full support for access control lists including port, VLAN, and routed and quality of service queueing and marking
- Full support for troubleshooting tools such as Switched Port Analyzer SPAN and Ethanalyzer
- Switch management by Cisco Prime Data Center Network Manager DCNM

Feature list

Switch layer:	L2/L3
Switch type:	Managed
Web-based management:	Y
Basic switching RJ-45 Ethernet ports quantity:	48
Basic switching RJ-45 Ethernet ports type:	Gigabit Ethernet 10/100/1000
SFP ports quantity:	48
Console port:	RS-232
Gigabit Ethernet copper ports quantity:	2
USB 2.0 ports quantity:	1
Networking standards:	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3z
Link aggregation:	Y
IP routing:	Y
Spanning tree protocol:	Y
10G support:	Y
VLAN support:	Y
MAC address table:	64000 entries
Switching capacity:	960 Gbit/s
Throughput:	720 Mpps
Number of VLANs:	4096
Jumbo frames support:	Y
Access Control List ACL:	Y
Management protocols:	SSHv2, SNMP v1/v2/v3, RADIUS, TACACS
Supported network protocols:	IPv4, IPv6
Rack mounting:	Y
Colour of product:	Grey
Form factor:	1U
Flash memory:	2048 MB
Packet buffer memory:	18 MB
Mean time between failures MTBF:	317030 h
AC input voltage:	100-240 V
AC input frequency:	50/60 Hz
Power consumption typical:	265 W
Number of power supply units:	2
Operating temperature T-T:	0 - 40 °C
Storage temperature T-T:	-40 - 70 °C
Operating relative humidity H-H:	10 - 85 %
Storage relative humidity H-H:	5 - 95 %
Operating altitude:	0 - 3000 m
Heat dissipation:	904 BTU/h
Width:	439 mm
Depth:	467 mm
Height:	43.6 mm
Weight:	7900 g

Cisco NEXUS 3548, 48 SFP+ PORTS (N3K-C3548P-10G)