Allied Telesis AT-8000S/48-50 48 PORT STACKAB (990-000828-50)

Allied Telesis 990-000828-50 Allied Telesis AT-8000S/48-50 48 PORT STACKAB (990-000828-50)

Allied Telesis AT-8000S/48-50 48 PORT STACKAB (990-000828-50)

Overview
One of a series of stackable switches from Allied Telesis, the AT-8000S/48 provides high performance Layer 2 switching in an affordable fixed configuration platform.This switch offers
48 10/100 ports, two fixed 1Gbps SFP slots plus two integrated stacking connectors that
deliver a total of 4Gbps stacking bandwidth.The stacking capability integrated into this platform
is configured as a resilient ring topology designed to provide high reliability and simplified management for higher port density applications.

Ideal Branch Office and Wiring Closet Connectivity
Powerful line rate performance and stackability make this switch ideal for branch offices or the
wiring closet of larger offices. The state-of-theart QoS capability of this product ensures
reliable delivery of advanced network services such as voice while effectively controlling the
continually increasing traffic needs found in today’s networks.

Easy Access Networking
Featuring an industry standard CLI and Allied Telesis’ intuitive yet fully featured Web interface
the advanced features of the AT-8000S/48 are accessible to a wide range of system
administrators. The well known CLI and Web interfaces significantly reduce learning time and
minimize the cost of deployment.

Secure Management
Only authorized administrators can access the management interface of the 8000S series.
Protocols such as SSL, SSH and SNMPv3 facilitate this protection of your network with
local or remote connections.

Securing the Network Edge
To ensure the protection of your data, it is important to control access to your network.
Protocols such as IEEE 802.1x port-based authentication guarantee that only known users
are connected to the network. Unknown users who physically connect can be isolated to a
pre-determined part of your network offering guests such benefits as Internet access while
ensuring the integrity of your private network data.

Gigabit and Fast Ethernet SFP Support
All switches in the 8000S family support both Gigabit and Fast Ethernet Small Form-factor
Pluggables SFPs.This makes the 8000S series an ideal family for environments where Gigabit
fiber switches will be phased in over time.The 8000S family allows for connectivity to the
legacy 100FX hardware until it is upgraded to Gigabit. Support for both speeds of SFPs allows
organizations to stay within budget as they migrate to faster technologies.

Feature list

Switch layer:	L3
Switch type:	Managed
Quality of Service QoS support:	Y
Basic switching RJ-45 Ethernet ports quantity:	52, 48, 52
SFP/SFP slots quantity:	4
DC-in jack:	Y
Port mirroring:	Y
Link aggregation:	Y
Auto MDI/MDI-X:	Y
MAC address table:	8000 entries
Supported data transfer rates:	10/100/1000 Mbps
Switching capacity:	17.6 Gbit/s
Number of VLANs:	4096
Maximum data transfer rate:	17.6 Gbit/s
Jumbo frames support:	Y
Certification:	UL 1950, EN60950, FCC, EN55022, VCCI, C-Tick, EN61000-3-2, EN61000-3-3, EN55024
Stackable:	Y
Processor clock speed:	400 MHz
Internal memory:	64 MB
Flash memory:	16 MB
Mean time between failures MTBF:	314322 h
Power consumption typical:	32.6 W
Input current:	1.5 A
Input voltage:	100 - 240 V
Power over Ethernet PoE support:	N
Operating temperature T-T:	0 - 40 °C
Storage temperature T-T:	-25 - 70 °C
Operating relative humidity H-H:	10 - 90 %
Storage relative humidity H-H:	5 - 95 %
Operating altitude:	0 - 3000 m
Operating temperature T-T:	32 - 104 °F
Weight:	3380 g
Data transfer rate:	13.09 Mbit/s
Dimensions WxDxH:	440 x 257 x 43 mm
Connectivity technology:	Wired
Networking features:	1000Mbps Ethernet
Authentication method:	SSHv2, SSLv3, RFC 1492, RFC 2138, IEEE 802.1x, RFC 2865, ACL
Input frequency:	50/60 Hz

Allied Telesis AT-8000S/48-50 48 PORT STACKAB (990-000828-50)