NETGEAR ProSafe Gigabit Stackable Smart Switch GS728TPS (2nd Generation), Managed 24 x 10/100/1000, 2 x combo Gigabit SFP, 4 x Gigabit SFP, POE (GS728TPSB-100EUS)
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
NetGear GS728TPSB-100EUS NETGEAR ProSafe Gigabit Stackable Smart Switch GS728TPS (2nd Generation), Managed 24 x 10/100/1000, 2 x combo Gigabit SFP, 4 x Gigabit SFP, POE (GS728TPSB-100EUS)
NETGEAR ProSafe Gigabit Stackable Smart Switch GS728TPS (2nd Generation), Managed 24 x 10/100/1000, 2 x combo Gigabit SFP, 4 x Gigabit SFP, POE (GS728TPSB-100EUS)
Enhanced Scalability and Network Convergence for Growing BusinessesThe ProSafe Gigabit Stackable Smart Switch family is unique in delivering the scalability, reliability, and performance growing small and medium-sized businesses need in an affordable and easy-to-manage package. The NETGEARs Second Generation of these Stackable Smart Switches consists of 4 models in 28/52-port configuration with or without PoE option. They come with more port density and a total of 6 SFP ports for fiber connectivity. Among them, 2 are shared, and the other 4 are dedicated for either stacking or uplinks. This new generation of Stackable Smart Switches offers more flexibility and scalability that will make it easier and non-interruptive for growing businesses to expand their network capacity.
Stacking for Scalability and High Availability
The new Generation of Stackable Smart Switches use 2 dedicated ports in the front of the switch for stacking, providing a 10Gbps, dual-ring, highly redundant stacking bus that carries intra-stack traffic and provide highest level of resilience, allowing you to stack up to six switches or up to 300 10/100/1000 Mbps ports, forming a virtual chassis for easy management under a single IP address. This stacking technology also provides several high-availability features to ensure business continuity:
- Resiliency: Due to redundant stacking port connections, there is an automatic fail-over in case any switch in the stack fails, with rapid reconfiguration, thus preventing network downtime.
- Hot-swappable: All switches in the stack are hot-swappable, and can be integrated or removed without disrupting the network.
All switches in the stack are hot-swappable, and can be integrated or removed without disrupting the network
These Stackable Smart Switches come with a complete suite of advanced features for more robust security, higher quality of service and high availability. This switch is equipped with highly advanced features such as access control lists ACL, static routing, rate limiting, IGMP snooping, and Dynamic VLAN assignment among others to provide a small and medium sized business with a network that is geared for growth while providing scalability and reliability.
Advanced Security
These switches also provide advanced features that provide more robust security to SMBs.
These include:
- 802.1x for authentication
- ACL filtering to permit or deny traffic based on MAC and/or IP addresses
Advanced Quality of Service QoS
Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice and video traffic and other real-time applications over less latency-sensitive traffic to ensure reliability and quality. The ability to prioritize traffic ensures quality of latency-sensitive services and applications despite increasing traffic loads.
Friendly to converged network with voice and video, the Stackable Smart Switches offers Auto Voice and Auto Video features that automatically configures QoS, Security and VLAN settings for IP phones and IP cameras.
IPv6 Support
IGMP filtering and querier ensure multicast streams are only delivered to interested receivers, preventing flooding even without a dedicated multicast router. When receivers are in different VLANs, Multicast VLAN registration MVR uses a dedicated multicast VLAN to forward multicast streams and avoid duplication for clients in different VLANs.
Manageability and Support
There are various easy and convenient ways to manage the Stackable Smart Switch. The new Stackable Smart Switches can be managed by the Smart Control Center software which comes free with the switch. With it, you can discover and manage all Netgear Smart Switches from a central location, conduct mass configuration and firmware upgrade. If you have other Netgear business products in your network, you can also use the NMS200, Netgears management platform for discovery and configuration of all your Netgear products in the network. For the peace of mind, these Stackable Smart Switches are backed by the NETGEAR ProSafe Lifetime Hardware Warranty and 1-year free 24x7 Advanced Technical Support.
Feature list
Maximum data transfer rate: | 1000 Gbit/s |
Supported data transfer rates: | 10, 100,1000Mbps |
Full duplex: | Y |
Latency: | 20ms |
Bandwidth: | 10 Gbit/s |
MAC address table: | 16000 entries |
Networking standards: | IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3z |
Flow control support: | Y |
Port mirroring: | Y |
Link aggregation: | Y |
Broadcast storm control: | Y |
Store-and-forward: | Y |
Rate limiting: | Y |
DHCP client: | Y |
IGMP snooping: | Y |
Number of VLANs: | 256 |
Spanning tree protocol: | Y |
Switch layer: | L2 |
Switch type: | Managed |
MIB support: | RFC 1213 MIB II, RFC 1643, RFC 1493 |
Quality of Service QoS support: | Y |
Multicast support: | Y |
Web-based management: | Y |
Ports quantity: | 28 |
Copper ethernet cabling technology: | 1000BASE-T, 100BASE-TX, 10BASE-T |
Gigabit Ethernet copper ports quantity: | 24 |
Power over Ethernet PoE ports quantity: | 8 |
Ethernet LAN RJ-45 ports quantity: | 24 |
SFP slots quantity: | 6 |
Security algorithms supported: | HTTPS, SSL/TLS |
Access Control List ACL: | Y |
Management protocols: | SNMP v1/v2c/v3 |
Supported network protocols: | IPv6 |
Width: | 440 mm |
Depth: | 257 mm |
Height: | 43 mm |
Weight: | 4310 g |
Power over Ethernet PoE Support: | Y |
AC input voltage: | 100-240 V |
AC input frequency: | 47/63 Hz |
Power consumption typical: | 236 W |
Input current: | 4 A |
Rack mounting: | Y |
Colour of product: | Black |
Stackable: | Y |
Number of queues: | 8 |
Routes quantity: | 32 |
Firmware upgradeable: | Y |
Safety: | CE, CUL 60950/EN 60950, CB, CCC |
Electromagnetic compatibility: | CE, FCC Part 15 Class A, VCCI Class A, EN 55022 CISPR 22, EN 55024 CISPR 24, C-Tick, CCC |
Operating relative humidity range: | 10 - 90 % |
Operating temperature range T-T: | 0 - 50 °C |
Storage temperature range T-T: | -20 - 70 °C |
Storage relative humidity range: | 5 - 95 % |
Drive device, buffer size: | 2 MB |
Internal memory: | 128 MB |
Memory type: | DDR |
Flash memory: | 32 MB |
LED indicators: | Y |
User guide: | Y |
Management platform: | SNMP |
Connectivity technology: | Wired |
Installed ports: | 28 |
Service level: | 24 x 7 |
Authentication method: | 802.1x RADIUS, TACACS |
Wireless LAN connection: | N |
Ethernet LAN connection: | Y |
Ethernet LAN data transfer rates: | 10, 100, 1000 Mbit/s |
Ethernet interface type: | Gigabit |
NETGEAR ProSafe Gigabit Stackable Smart Switch GS728TPS (2nd Generation), Managed 24 x 10/100/1000, 2 x combo Gigabit SFP, 4 x Gigabit SFP, POE (GS728TPSB-100EUS)
General
24-Port
Χαρακτηριστικά
Product Code
0713025
EAN Code
0606449084764
Manufacturer
NetGear