POWER INJECTOR

Cisco AIR-PWRINJ3= POWER INJECTOR

POWER INJECTOR

Cisco Aironet® Power Injector products increase the deployment flexibility of Cisco Aironet wireless access points and bridges by providing an alternative powering option to local power, inline power-capable multiport switches, and multiport power patch panels.

The single-port Cisco Aironet power injectors combine 48-VDC power with the data signal, sending both to the Cisco Aironet access point or bridge. Cisco Aironet 350 Series access points and bridges include an integrated power supply and injector AIR-PWRINJ. The power injector for Cisco Aironet 1100 and 1200 series access points AIR-PWRINJ3 works with the power supply provided with the access point.

The Cisco Aironet Power Injector Media Converter AIR-PWRINJ-FIB converts fiber media to Category 5 media and combines the resulting data signal with power for delivery to the access point or bridge. The power injector media converter accepts 48 VDC power from either the barrel connector of the local power supply or an alternative 48 VDC power source. When powered by an alternate 48 VDC power source connected using the provided power supply pigtail, the Power Injector Media Converter is UL2043 certified and suitable for installation in environmental air spaces. The local power supply is provided with the Cisco Aironet 1100 and 1200 series access points, while applicable local power supplies for the Cisco Aironet 350 Series access points and bridges are available separately.
The power injectors provide up to 15 watts depending on the Cisco power supply model over the unused wire pairs of a Category 5 Ethernet cable, supplying enough power to provide for up to a 100-meter cable run.

Feature list

LED indicators:	2 - Power Status, Device Connectivity
Cables included:	RJ-45 100 m from switch to device
Power requirements:	Cisco Aironet power supply, 48 VDC ± 5%, 18 watts
Dimensions WxDxH:	139.3 x 54.3 x 34.5 mm
Power supply input voltage:	48 VDC supplied by external power supply V

POWER INJECTOR