LANCOM L-1302acn dual Wireless / Wireless router / GigE / 802.11a/b/g/n/ac / Dual Band | 61732

Description

The LANCOM L-1302acn dual Wireless accelerates Wireless LAN to Gigabit speed. Thanks to the support of the modern WLAN standard IEEE 802.11ac a gross data rate of up to 1,300 Mbps is achieved. With its two WLAN radio modules both 11n clients (via 2.4 GHz) and the increasing number of modern 11ac clients (via 5 GHz) can be provided with high-speed WLAN. On top of that, LANCOM access points with IEEE 802.11ac are fully backwards compatible to older WLAN standards as 802.11 a/b/g/n. Thus the increasing demand for bandwidth of current clients can be fulfilled.

Special Features

• 1 x Gigabit WLAN based on IEEE 802.11ac (5 GHz) with up to 1,300 Mbps
• 1 x WLAN based on IEEE 802.11n (2,4 or 5 GHz) with up to 450 Mbps
• Parallel operation at 2.4 and 5 GHz as well as IEEE 802.11 n/ac for heterogeneous client environments
• Support of 3 x 3-MIMO, 80 MHz WLAN channels, and 256-QAM
• Support of DFS channels of the 5 GHz frequency band
• Professional WLAN optimization with LANCOM active radio control
• Client steering for an intelligent distribution of clients to the best access point

Product features

• High-speed enterprise applications
  With the rapid increase of mobile end devices in corporate environments and the habitually grown comfort of a wireless access, the demand for more bandwidth is growing as well. The LANCOM L-1302acn dual Wireless with the support of the WLAN standard IEEE 802.11ac combines wireless freedom with the speed of wired networks. With a gross data rate of up to 1.3 Gbps the path is paved towards modern corporate applications with high demands for bandwidth. Applications with a high demand for bandwidth, so far only realizable via stationary cable networks, are now wireless and flexible due to the WLAN standard. As a consequence, you can, for example, arrange telepresence applications location-independently without any loss of quality.
• More performance
  In comparison to its predecessor IEEE 802.11n, the standard 802.11ac transmits exclusively at 5 GHz, with the benefit of more free, non-overlapping channels in contrast to the 2.4 GHz frequency band. Due to the wider 80 MHz radio channels and the more efficient modulation based on QAM-256, the resulting gross data rate per spatial stream is 433.3 Mbps. The LANCOM L-1302acn dual Wireless supports 3 x 3 MIMO and thus three spatial streams for an overall performance of 1,300 Mbps. This increase in speed is a big surplus especially for mobile clients such as tablet PCs or smart phones since the significantly shorter data transmission time leads to an increased battery lifetime.
• Better and reliable coverage
  Keep in control over your wireless infrastructure! With the intelligent WLAN optimization concept LANCOM active radio control (ARC) you sustainably optimize your radio field, proactively prevent sources of interference, and therefore use the full potential of your WLAN! As an example, the LANCOM L-1302acn dual Wireless supports client steering for an intelligent distribution of WLAN clients to the most ideal access point. As a consequence, the performance of your WLAN is significantly increased, especially in WLAN scenarios with a high number of end devices.
• More management
  The L-13xx series offers the familiar LANCOM flexibility of management: each access point can be operated in standalone mode and managed with the free administration tools, or it can be centrally managed by a LANCOM WLAN controller. Irrespective of whether the WLAN network is decentralized or centrally managed, a highly specialized monitoring solution is available with LANCOM LSM. This powerful monitoring and surveillance system for medium-sized and large networks is capable of monitoring up to 1,000 devices to give you secure control over your entire network infrastructure.