APC Smart-UPS 1500 LCD / UPS (rack-mountable) / AC 230 V / 1 kW / 1500 VA / RS-232, USB / output connectors: 4 / 2U / black | SMT1500RMI2U

Description

Green mode bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter provides actual kilowatt hours of usage for energy conscious users. Intuitive LCD interface provides clear and accurate information with the ability to configure the UPS locally with easy to use navigation keys. Single switched outlet group may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on / off and non-critical load shedding. Pure sine wave output on battery simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Cold-start capable provides temporary battery power when the utility power is out.

Special Features

• Green mode
• Energy meter
• Intuitive LCD interface
• Single switched outlet group
• Pure sine wave output on battery
• Cold-start capable
• SmartSlot
• Temperature-compensated battery charging
• Intelligent battery management
• Power conditioning
• Automatic restart of loads after UPS shutdown
• Disconnected battery notification
• Network manageable
• Audible alarms
• Serial connectivity
• Hot-swappable batteries
• Predictive failure notification
• Resettable circuit breakers
• Battery failure notification

Product features

• Green mode
  Green mode bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Energy meter
  Provides actual kilowatt hours of usage for energy conscious users.
• Intuitive LCD interface
  Provides clear and accurate information with the ability to configure the UPS locally with easy to use navigation keys.
• Single switched outlet group
  Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on / off and non-critical load shedding.
• Pure sine wave output on battery
  Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
• Cold-start capable
  Provides temporary battery power when the utility power is out.
• SmartSlot
  Customize UPS capabilities with management cards.
• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Power conditioning
  Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• Network manageable
  Provides remote power management of the UPS over the network.
• Audible alarms
  Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
• Serial connectivity
  Provides management of the UPS via a serial port.
• Hot-swappable batteries
  Ensure clean, uninterrupted power to protected equipment while batteries are being replaced.
• Predictive failure notification
  Provides early-warning fault analysis ensuring proactive component replacement.
• Resettable circuit breakers
  Enable a quick recovery from overload events.
• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance.