Cisco Aironet 3802I / Radio access point / 802.11ac Wave 2 / Wi-Fi 5 / 2.4 GHz, 5 GHz | AIR-AP3802I-E-K9

Product Features

• 802.11ac Wave 2 support
  Provides a theoretical connection rate of up to 2.6 Gbps per radio - roughly double the rates offered by today's high-end 802.11ac access points.
• High-density experience
  Best-in-class RF architecture that provides high-performance coverage for a high density of client devices, giving the end user a seamless wireless experience. Features include custom hardware in 802.11ac Wave 2 radios, Cisco CleanAir, Cisco ClientLink 4.0, cross-access point noise reduction, and an optimized client roaming experience.
• Multiuser multiple-input multiple-output (MU-MIMO) technology
  Supporting three spatial streams, MU-MIMO enables access points to split spatial streams between client devices, to maximize throughput.
• Multigigabit Ethernet support
  Providing multiple Gigabit uplink speeds of 2.5 Gbps and 5 Gbps in addition to 100 Mbps and 1 Gbps speeds. All speeds are supported on Category 5e cabling for an industry first, as well as 10GBASE-T cabling.
• 160-MHz channel support
  Supporting channels up to 160 MHz wide, Dynamic Bandwidth Selection allows the access point to dynamically switch between 20-, 40-, 80-, and 160-MHz channels, depending on the RF channel conditions, providing the industry's well-performing wireless network.
• Zero-impact Application Visibility and Control
  Uses dedicated hardware acceleration to improve the performance of line-speed applications such as Cisco Application Visibility and Control.
• Dual 5 GHz radio support
  Enables both radios to operate in 5 GHz client serving mode, allowing 5.2 Gbps over-the-air speed while increasing client capacity.
• Smart antenna connector
  An intelligent second physical antenna connector is included on 3800 Series models with an external antenna. This connector provides advanced network design flexibility for high-density and large open-area environments such as auditoriums, convention centers, libraries, cafeteria, and arenas/stadiums, allowing two sets of antennas to be connected and active on a single access point.
• Automatic link aggregation (LAG) support
  802.3ad (Link Aggregation Control Protocol [LACP]) compliant, allowing both Gigabit Ethernet interfaces to automatically enable LAG, increasing overall throughput to the access point.
• Cisco ClientLink 4.0
  Cisco ClientLink 4.0 technology improves downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11a/b/g/n/ac while improving battery life on mobile devices such as smartphones and tablets.

Special Features

• 802.11ac Wave 2 support
• High-density experience
• Multiuser multiple-input multiple-output (MU-MIMO) technology
• Multigigabit Ethernet support
• 160 MHz channel support
• Zero-impact Application Visibility and Control
• Dual 5 GHz radio support
• Smart antenna connector
• Automatic link aggregation (LAG) support
• Cisco ClientLink 4.0

Product Specification