Sapphire NITRO+ RX Vega64 8G HBM2 / Graphics card / Radeon RX VEGA 64 / 8 GB HBM2 / PCIe 3.0 x16 / 2 x HDMI, 2 x DisplayPort | 11275-03-40G

Description

The SAPPHIRE NITRO+ Radeon RX VEGA 64 8G Limited Edition graphics card is the highly anticipated high-end graphics card from the SAPPHIRE NITRO Gaming Series family. The NITRO+ Radeon RX VEGA 64 Limited Edition card brings out the best of AMD's VEGA architecture with factory-overclocked performance and an advanced custom cooling solution enshrouded in a captivating design. Enter the world of extreme gaming with high resolution, high refresh-rate displays and virtual reality headsets that you've always dreamed of. The SAPPHIRE NITRO+ Radeon RX VEGA 64 card comes factory-overclocked. The NITRO+ RX VEGA 64 model features a GPU with 4096 Stream Processors running with 1611 MHz Boost Clock. It comes equipped with two stacks of 2nd generation high bandwidth memory.

Sapphire NITRO+ RX Vega64 8G HBM2 / Graphics card / Radeon RX VEGA 64 / 8 GB HBM2 | 11275-03-40G

Special Features

• Vapor chamber-based cooling
• Turbine-X system
• SAPPHIRE NITRO Gear Card Support Bracket
• Fan Check
• NITRO CoolTech
• Black Diamond Chokes 4
• VR friendly

Product features

• Vapor chamber-based cooling
  To get the operational temperatures of the GPUs down to the targeted 70°C, SAPPHIRE has brought back its innovative vapor chamber technology made famous through SAPPHIRE's Vapor-X series of graphics cards. Using this instead of the copper base on the GPU and HBM2 memory has lowered temperatures by up to 5°C. The vapor chamber is combined with a set of six nickel-plated heatpipes and a substantial, densely-packed heatsink.
• Turbine-X system
  An original SAPPHIRE-designed PCB includes the Turbine-X system that can control up to two external PWM fans mounted inside the PC's chassis. A dedicated hardware controller on the card intelligently adjusts the speed of connected fans based on the reads from five thermal sensors included on the PCB to improve the system's overall airflow.
• SAPPHIRE NITRO Gear Card Support Bracket
  With these NITRO + RX Vega Limited Editions, SAPPHIRE is including a useful accessory: the SAPPHIRE NITRO Gear Card Support Bracket. This elegant nickel-plated and heat-treated tool helps stabilize and maintain the correct position of longer graphics cards to prevent PCI-Express slot damage or PCB bending. Thanks to its smart mechanical design, the bracket doesn't require any additional space and only touches the card by a movable knob with a rubber, soft top.
• Fan Check
  With NITRO+ models, SAPPHIRE has upped the stakes with its Fan Check, which allows users to check the cooler's status via SAPPHIRE TriXX 3.0 software, and contact customer support in case of problems.
• NITRO CoolTech
  With the SAPPHIRE NITRO Gaming Series cards' Intelligent Fan Control III, the fan starts precisely at 56 degrees Celsius to smartly balance performance against fan noise.
• Black Diamond Chokes 4
  The Black Diamond Chokes are cooler and more power efficient than a normal choke - and these Mark 4 Chokes reduce the coil temperatures.
• VR friendly
  The SAPPHIRE NITRO Gaming Series cards come with Dual HDMI ports, specifically designed to work with VR. By having two HDMI ports, you can have both an HD monitor and cutting-edge VR headset running at the same time.