Zyxel WAC6303D-S / Radio access point / 802.11ac Wave 2 / Wi-Fi / Dual Band / wall / ceiling mountable | WAC6303D-S-EU0101F
Zyxel WAC6303D-S / Radio access point / 802.11ac Wave 2 / Wi-Fi / Dual Band / wall / ceiling mountable | WAC6303D-S-EU0101F
Description
Networking administrators managing busy venues must understand how visitors longed for Wi-Fi and how challenging it is to meet the demands within limited budgets.Zyxel brings affordable and triple-performance 3x3:3 MU-MIMO access point WAC6303D-S which is built with Smart antenna to mitigate co-channel interference in high-density environment. And its embedded BLE Beacon provides insight into your consumers, WAC6303D-S not only resolves the challenge today it thinks for the ever-growing mobility demands tomorrow.
Zyxel WAC6303D-S / Radio access point | WAC6303D-S-EU0101F
Special Features
- MU-MIMO
- Next generation Transmit Beamforming benefits overall networking
- Optimal Wireless Experience
- Built for superior performance
- Optimized wireless experience with advanced features
- Unified access point- Fits all businesses
Product features
- MU-MIMO
Stepping up from 802.11ac, the second generation Wave 2 technology introduces Multi-User MIMO (MU-MIMO). This is an important Wi-Fi development that enables an AP to communicate with multiple clients. - Next generation Transmit Beamforming benefits overall networking
Transmit Beamforming (TxBF) technology is another key to implement reliable high-density Wi-Fi connection. It increases overall network transmission data rates, which benefits not only MU-MIMO clients but also all existing clients. - Optimal Wireless Experience
WAC6303D-S features Smart antenna technology which is proven able to mitigate co-channel interference, and adaptively adjust antenna patterns to fit in high-density application. - Built for superior performance
The WAC6303D-S is built with a high-efficiency antenna module, premium power amplifiers and low-noise elements delivering superior wireless performance over other Wave 2 access points on the market. - Optimized wireless experience with advanced features
To provide outstanding performance in crowded environment, WAC6303D-S features 3G/4G interference immunity, excellent receive sensitivity and DCS, which enlarge its service coverage for more clients and better quality of connection. - Unified access point- Fits all businesses
Stay standalone mode if you're a start-up, needing just few APs; convert to controller-managed mode when business grows up, requiring hundreds of APs.
Product Specification
Device Type | Radio access point |
Width | 21.1 cm |
Depth | 22.3 cm |
Height | 3.9 cm |
Weight | 800 g |
Localisation | Europe |
Form Factor | Wall / ceiling mountable |
Connectivity Technology | Wireless |
Data Transfer Rate | 1300 Mbps |
Line Coding Format | DBPSK, DQPSK, CCK, 64 QAM, 256 QAM, BPSK, QPSK, 16 QAM |
Data Link Protocol | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2 |
Remote Management Protocol | SNMP 3, SNMP 2c, CLI |
Frequency Band | 2.4 GHz, 5 GHz |
Performance | WLAN throughput: 1.6 Gbps |
Capacity | Maximum number of configured SSIDs: 16 |
Features | VLAN support, DiffServ support, manageable, MAC address filtering, IPv6 support, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), 2T2R MIMO technology, Maximum Ratio Combining (MRC), 3T3R MIMO technology, Low Density Parity Check (LDPC), Transmit Beam-forming (TxBF) ready, rogue access point detection, plenum-rated, DHCP client, Cyclic Delay Diversity (CDD), Maximum Likelihood Demodulation (MLD), security lock slot (cable lock sold separately), ZyXEL One Network (ZON), MU-MIMO technology, Unscheduled Automatic Power Save Delivery (U-APSD), beamforming technology, Pre-Authentication, packet aggregation A-MPDU, packet aggregation A-MSDU, MAC address authentication, Smart Connect, PMK Caching, low end sensitivity improvements (LESI), time domain channel smoothing, Layer 2 isolation |
Encryption Algorithm | WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise |
Authentication Method | RADIUS, LDAP, Extensible Authentication Protocol (EAP) |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.3at, IEEE 802.3az, IEEE 802.11ac Wave 2, IEEE 802.3au, IEEE 802.11ab |
Antenna | Internal |
Gain Level | 4 dBi |
Interfaces | 2 x 1000Base-T (PoE+) - RJ-45 ¦ 1 x console |
Included Accessories | Wall/ceiling mounting plate |
MTBF | 3,960,217 hours |
Compliant Standards | EN 61000-3-2, EN 61000-3-3, EN55024, FCC Part 15 B, FCC Part 15 C, IEC 60950-1, EN 60950-1, FCC Part 15 E, BSMI CNS 13438, EN 60601-1-2, BSMI CNS 14336-1, EN 301 489-1, LP0002, ETSI EN 300 328, EN 301 893, EN 55032, EN 301 489-17 |
Power Over Ethernet (PoE) Supported | PoE+ |
Power Device | External power adapter |
Voltage Required | AC 120/230 V (50/60 Hz) |
Shipping Width | 25.1 cm |
Shipping Depth | 24.7 cm |
Shipping Height | 5.5 cm |
Shipping Weight | 1.04 kg |
Min Operating Temperature | -20 °C |
Max Operating Temperature | 60 °C |
Humidity Range Operating | 10 - 90% (non-condensing) |