ASUS ROG-STRIX-RTX3090-O24G-WHITE / OC Edition / graphics card / GF RTX 3090 / 24 GB GDDR6X / PCIe 4.0 / 2 x HDMI, 3 x DisplayPort / white | 90YV0F96-M0NM00
Product Features
- Axial-tech upgrades
The Axial-tech fan design is optimized for a new, larger heatsink that features more fins and surface area than last gen. The blade count is increased on all three fans, with 13 on the center fan and 11 on the auxiliary fans. The barrier ring on the side fans is slimmed down to allow for more lateral intake and to provide better airflow through the cooling array. The center fan's extra blades and full-height ring provide boosted static pressure to blast air directly onto the GPU heat spreader. - MaxContact technology
To get heat up off the die and into the heatsink array, ASUS has engaged MaxContact technology to polish the surface of the heat spreader and improve smoothness at the microscopic level. The extra flatness allows for better contact with the die for enhanced thermal transfer. - 2.9-slot design
The heat spreader draws heat up into heatpipes that carry it through a fin stack that fills a large 2.9-slot footprint. Increasing the heatsink size compared to the last generation provides more thermal headroom to account for the new high-performance chipset. - Functional front
Careful attention has been paid to the front of the GPU, as it's the most visible part of the card in typical configurations. An addressable RGB element can be customized with Armoury Crate to create a uniform look along with other ROG components. To fulfill the power demands of the GeForce RTX 3090, three 8-pin power connectors are present, along with an onboard circuit that monitors PSU rail voltage. The circuit is fast enough to catch any transients that result in the rail voltage dropping too low. If that happens, a red LED will light up to indicate a power supply issue. The Strix's reinforced metal frame is also visible here, adding a literal layer of durability.
Special Features
- Axial-tech upgrades
- MaxContact technology
- 2.9-slot design
- Functional front
Product Specification
Device Type | Graphics card |
Bus Type | PCI Express 4.0 |
Graphics Engine | NVIDIA GeForce RTX 3090 |
Boost Clock | 1890 MHz |
CUDA Cores | 10496 |
Max Resolution | 7680 x 4320 |
Max Monitors Supported | 4 |
Interfaces | 2 x HDMI ¦ 3 x DisplayPort |
API Supported | OpenGL 4.6, DirectX 12 Ultimate |
Features | Dual Bios, NVIDIA G-Sync ready, Super Alloy Power II technology, MaxContact technology, Real-Time Ray Tracing, Axial-tech Fan Design, Nvidia DLSS, NVIDIA Ampere GPU technology, 2.9-slot Fan Cooler, HDCP |
Memory | Memory |
Size | 24 GB |
Technology | GDDR6X SDRAM |
Memory Speed | 19.5 Gbps |
Bus Width | 384-bit |
System Requirements | System Requirements |
Required Power Supply | 750 W |
Additional Requirements | 3 x 8 pin PCI Express power connector |
Miscellaneous | Miscellaneous |
Included Accessories | ROG touch fastener, collection card, ROG ruler, ROG logo plate |
Software Included | ASUS GPU Tweak II |
Compliant Standards | HDCP 2.3, DisplayPort 1.4a |
Width | 5.78 cm |
Depth | 31.85 cm |
Height | 14.01 cm |
Enclosure Colour | White |