HGST Ultrastar 7K6000 HUS726040ALE610 / Hard drive / 4 TB / internal / 3.5" / SATA 6Gb/s / 7200 rpm / buffer: 128 MB / EcoTrac | 0F23005
HGST Ultrastar 7K6000 HUS726040ALE610 / Hard drive / 4 TB / internal / 3.5" / SATA 6Gb/s / 7200 rpm / buffer: 128 MB / EcoTrac | 0F23005
Description Corporate and cloud data centers are under extreme pressure to improve the efficiency of storage. To address this data center challenge, HGST introduces Ultrastar 7K6000, delivering plenty of capacity and a standard, 3.5-inch hard drive, for capacity-optimized enterprise applications. Ultrastar 7K6000 provides more capacity and better power efficiency. The Ultrastar 7K6000 also delivers great storage efficiency through the unrivaled performance, achieving higher write performance, even at higher workloads, thanks to HGST media cache architecture, a disk-based caching technology, which provides a large non-volatile cache on the disk. Media cache also allows for improved reliability and data integrity during unexpected power loss. Special Features
Product features
|
Product Specification
Device Type | Hard drive - internal |
Capacity | 4 TB |
Form Factor | 3.5" x 1/3H |
Interface | SATA 6Gb/s |
Buffer Size | 128 MB |
Bytes per Sector | 4096 |
Features | Rotational Vibration Safeguard (RVS), Advanced Format technology, 24x7 continuous operation, Instant Secure Erase (ISE), media caching technology, Rebuild Assist mode, non-volatile cache |
Width | 101.6 mm |
Depth | 147 mm |
Height | 26.1 mm |
Weight | 715 g |
Drive Transfer Rate | 600 MBps (external) |
Internal Data Rate | 202 MBps |
Seek Time | 7.6 ms (average) |
Average Latency | 4.16 ms |
Spindle Speed | 7200 rpm |
MTBF | 2,000,000 hours |
Non-Recoverable Errors | 1 per 10^15 |
Load / Unload Cycles | 600,000 |
Interfaces | 1 x SATA 6 Gb/s - 7 pin Serial ATA |
Compatible Bay | 3.5" x 1/3H |
Power Consumption | 9.1 Watt (active) ¦ 7.1 Watt (low power idle) |
Compliant Standards | EcoTrac |
Service & Support | 5 years warranty |
Service & Support | Limited warranty - 5 years |
Min Operating Temperature | 5 °C |
Max Operating Temperature | 60 °C |
Shock Tolerance (operating) | 70 g @ 2 ms half-sine pulse |
Shock Tolerance (non-operating) | 300 g @ 1 ms half-sine pulse |
Vibration Tolerance (operating) | 0.67 g @ 5-500 Hz |
Vibration Tolerance (non-operating) | 1.04 g @ 5-500 Hz |
- 3.5"
- Internal
- SATA