BinTec W1003n / Radio access point / 802.11a/b/g/n / Dual Band | 5510000321
BinTec W1003n / Radio access point / 802.11a/b/g/n / Dual Band | 5510000321
Description The BinTec W1003n access point has three different operating modes. You can operate the device as a stand-alone access point or manage it from a central BinTec WLAN controller. The W1003n can also function as a WLAN controller (master access point) itself to manage up to six APs. The BinTec WLAN controller solution can be used in wireless networks with anywhere from 2 to 150 access points. The BinTec WLAN controller solution provides a scalable, end-to-end solution that lets you expand your network without migrating to a technology. This flexibility protects your investments in existing infrastructures.The clean lines and elegant design of the W1003n make it an appealing choice for wall-mounting or ceiling-mounting. It also looks perfectly at home in high-end office spaces, hotels, and hospitals. Despite its handsome appearance, this access point also knows how to blend in. We've placed the antennas inside the housing, and you can turn off the LEDs to eliminate distractions.The included mounting hardware lets you quickly and easily mounts the unit onto a ceiling or wall. For protection against theft, the W1003n is also compatible with Kensington locks. As an alternative to wall-or ceiling-mounting, you can also place the device on desktop thanks to the included rubber feet.The W1003n also supports handover and roaming. With a properly set up and surveyed wireless network managed by a BinTec WLAN Controller, that means wireless devices enjoy seamless coverage in the network. And seamless coverage is a must if you are, for instance, implementing a VoWLAN (Voice over WLAN) solution or using wireless barcode scanners for logistics applications.The W1003n gives you green IT right out of the box with its automatic energy-saving features. If no client is connected, the AP turns off any circuits not currently in use, downshifting to Mimo 1 x 1. The Gigabit Ethernet ports support the energy-saving 802.3az standard, ensuring only as much energy as needed is used. Special Features
|
Product Specification
Device Type | Radio access point |
Width | 15.9 cm |
Depth | 14.5 cm |
Height | 4.3 cm |
Form Factor | External |
Connectivity Technology | Wireless |
Data Transfer Rate | 300 Mbps |
Data Link Protocol | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n |
Spread Spectrum Method | OFDM, DSSS |
Remote Management Protocol | SNMP 1, SNMP 2, Telnet, SNMP 3, HTTP, HTTPS, SSH, SSH-2 |
Frequency Band | 2.4 GHz, 5 GHz |
Status Indicators | Link activity, status |
Features | NAT support, power over Ethernet (PoE), PAT support, VLAN support, auto-uplink (auto MDI/MDI-X), MIMO technology, wall mountable, ceiling mountable |
Encryption Algorithm | MD5, AES, 128-bit WEP, 64-bit WEP, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise |
Authentication Method | Radio Service Set ID (SSID) |
Compliant Standards | IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11h, IEEE 802.11e, IEEE 802.11n, IEEE 802.3az, IEEE 802.11f |
Antenna | Internal |
Interfaces | 1 x 1000Base-T - RJ-45 ( WAN / LAN ) |
Mounting Kit | Included |
Compliant Standards | EN 60950, IEC 60950, EN 301.489.1, EN 301.489.17, EN 60601-1-2 |
Power Over Ethernet (PoE) Supported | PoE |
Service & Support | 2 years warranty |
Service & Support Details | Limited warranty - 2 years |
Min Operating Temperature | 0 °C |
Max Operating Temperature | 40 °C |
Humidity Range Operating | 10 - 95% (non-condensing) |