ARCTIC Alpine 23 / Processor cooler / (for: AM2, AM2+, AM3, AM3+, FM2, AM4) / aluminium / 90 mm | ACALP00035A

Special Features

• Improved cooling performance
• Wide RPM range
• Lower power consumption & minimum vibration
• High-quality bearing
• Extended life span
• Pre-applied MX-2 thermal paste
• Easy and tool-free installation

Product features

• Improved cooling performance
  The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.
• Wide RPM range
  The Alpine 23 features an innovative motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed.
• Lower power consumption & minimum vibration
  The Alpine 23 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.
• High-quality bearing
  Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
• Extended life span
  A 10 °C lower motor temperature roughly doubles the life span of a fan. The ARCTIC motor has a four times longer service life through its low coil temperature.
• Pre-applied MX-2 thermal paste
  The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.
• Easy and tool-free installation
  Thanks to the mounting clips, the installation is really easy. Alpine 23 is simply plugged onto the existing AMD retention modules and screwed tight.