APC Replacement Battery Cartridge #116, 48 V 7 Ah Sealed Lead-Acid UPS Battery for Smart-UPS X SMX750I & SMX1000I
Brand:
APC
APC Replacement Battery Cartridge #116, 48 V 7 Ah Sealed Lead-Acid UPS Battery for Smart-UPS X SMX750I & SMX1000I
€467.34 inc. VAT
APCRBC116
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
APC Replacement Battery Cartridge #116 for Smart-UPS X SMX750I & SMX1000I
Genuine APC RBC48 V 7 AhSmart-UPS XFully assembled
The APC Replacement Battery Cartridge #116 is Schneider Electric's genuine 48 V 7 Ah sealed lead-acid battery for the Smart-UPS X SMX750I & SMX1000I, made to restore a UPS with a worn battery to its original runtime. It is for anyone whose UPS has started beeping for a battery replacement, fails its self-test or shuts down early during a power cut.
APC RBC cartridges are tested and certified by APC for compatibility with the UPS models they are listed for, so the UPS charges, monitors and reports the new battery exactly as it did when new. A UPS battery is a consumable: heat, frequent outages and age wear it out, and once its capacity drops the UPS can no longer carry your equipment through even a short interruption. Schneider quotes a typical lifetime of 3–5 years for this cartridge.
Schneider Electric lists it for these 230 V models: SMX750I, SMX750INC, SMX1000I.
Before you order: APCRBC115 looks almost identical but is the 9 Ah cartridge for the SMX1500 rack/tower. SMX750I/SMX1000I take APCRBC116. Always check the UPS part number on its label, not just the VA rating.
What's in the Box
- 1 x APC Replacement Battery Cartridge #116
- Schneider does not itemise any further contents. Expect the cartridge alone, fully assembled and ready to fit
What It Means in Practice
- Restores the runtime of your existing UPS, so it is much cheaper than replacing a UPS that is otherwise healthy.
- Sealed, valve-regulated lead-acid design: no topping up, no maintenance, no acid to handle.
- It comes as a ready-made cartridge, so you swap the whole unit instead of wiring individual blocks.
- Weight is 10.45 kg. Plan for a firm grip, and for rack units, support the cartridge as you pull it out.
- After fitting, let the UPS charge the new battery fully and run a self-test so the runtime estimate recalibrates.
- The old battery is lead-acid and must not go in household waste. Take it to an authorised battery collection point.
What Will Not Work
- UPS models that are not listed for RBC #116. Cartridges differ in voltage, size and connector even within the same APC family.
- It will not repair a UPS with a faulty charger or electronics. If the UPS still fails its self-test with a new battery, the UPS itself needs service.
- It will not give more runtime than the UPS had when new. For longer runtime you need a model with external battery-pack support.
- Non-APC UPS brands, even when the battery voltage looks the same.
Key Features
Genuine APC RBC
Certified by APC for the listed UPS models, so charging and battery monitoring work as designed.
Ready to install
Supplied fully assembled with the connectors in place. No cutting, crimping or rewiring.
Maintenance-free
Sealed lead-acid (VRLA) construction that is leak-proof in normal use and needs no electrolyte top-up.
Restores runtime
Brings the UPS back to its original battery runtime, often for a fraction of the cost of a new UPS.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
Battery wear is the most common reason a UPS fails during an outage, and the cartridge is usually the only part that needs replacing. If your UPS is otherwise healthy, RBC #116 is the clean fix. If it has already been through two or more battery replacements, compare the cost with a new unit in our UPS range.
✓ Buy it if your UPS part number appears in the compatibility list and the UPS beeps for battery replacement, fails its self-test or cuts out early.
✕ Skip it if your UPS model is not listed, or the UPS fails even with a known-good battery. That points to the UPS itself.
→ Also consider a new UPS from our range if your unit is near end of life, or an external battery pack if your model supports one and you need more runtime.
Not sure which battery your UPS needs? Send us the UPS model and serial number from the label on the back or underside, and we will confirm the right cartridge before you order.
Features - APC - APCRBC116
Colour
black
More Details
Product Code
2708889
EAN Code
0731304281696
Manufacturer
APC