Brother QL-820NWBcVM Visitor Badge Label Printer Bundle, 62 mm, 300 dpi, LCD, USB, LAN, Wi-Fi & Bluetooth

The Brother QL-820NWBcVM is a 2-inch desktop label printer that prints by direct thermal at 300 dpi and up to 176 mm/s (up to 110 labels/min), made for visitor badges, event passes and reception labels, as well as everyday office labels.

It connects over USB 2.0, Ethernet 10/100, Wi-Fi 802.11b/g/n + Wi-Fi Direct, Bluetooth 5.2, AirPrint. Labels are designed in Brother's free P-touch Editor or printed straight from Word, Excel and Outlook through the Office add-in; SDKs are available for custom apps. This VM (visitor management) bundle ships with three DK-N55224 non-adhesive rolls, enough for roughly 1,000 badges. It is a compact, single-user or workgroup printer for counters, packing benches, back offices and small warehouses rather than a 24/7 industrial line printer.

In practice it sits between a PC or POS terminal and a roll of labels: you design labels in label software such as BarTender, or print them straight from your ERP, WMS, e-shop back office or courier portal. Label size, gap and darkness are set once in the driver or by a quick media calibration, and after that every print lands in the same place on the label.

• QL-820NWBc label printer (visitor management bundle)
• 3 × DK-N55224 non-adhesive paper rolls (54 mm) for visitor badges
• AC adapter, power cord and USB cable
• Printed documentation

• Brother DK labels and continuous tape up to 62 mm wide — address labels, file and shelf labels, name badges; the cutter trims continuous tape to any length up to 1 m.
• At up to 176 mm/s (up to 110 labels/min) a 50 mm long label prints in roughly 0.3 seconds, so batches of a few hundred labels are a matter of minutes.
• On the network (Ethernet or Wi-Fi) several PCs can print to it, so one printer can serve a packing bench or an office.
• No ribbon to buy or change: running cost is the labels only, and loading a new roll takes seconds.
• The backlit LCD and control panel let staff reprint or print stored templates at the printer itself, without a computer.
• With the optional Li-ion battery base it can be used away from a socket, for example at an event entrance.

• Non-Brother label rolls, media wider than 62 mm and 4-inch shipping labels.
• Ribbons and thermal transfer-only labels — this model has no ribbon mechanism.
• Full-colour printing — red appears only on the special DK-22251 black/red roll; all other DK rolls print black.