Cisco 19-inch Rack-Mount Kit for 1100 Series ISR Routers C111x and C1111X, 1RU, with Power Supply Space in Bracket

The Cisco ACS-1100-RM-19= is the official 19-inch rack-mount kit for the Cisco 1100 Series Integrated Services Routers of the C111x and C1111X families, letting you move a desktop branch router into a standard rack or network cabinet at a height of one rack unit.

The Cisco 1100 routers ship as desktop units without rack ears. This kit adds left and right brackets that attach to the sides of the chassis, and Cisco designed the bracket with room inside for the router's external power supply, so the power brick does not hang loose behind the rack. It is meant for IT teams and integrators who standardise branch offices and want the router, switch and patch panel in the same cabinet.

• Rack-mount brackets for the left and right side of the router
• Screws for fixing the brackets to the router chassis
• The router itself, its power supply and cage nuts for the rack are not included

• Your Cisco 1100 router sits in 1RU of a 19-inch rack instead of on a shelf or the cabinet floor.
• The external power supply is held in the bracket, so the cabling at the back stays tidy and the brick cannot fall behind other equipment.
• Cisco recommends keeping about 4.4 cm (1.75 in) of free space around the router's vents — avoid packing hot equipment tight above and below it.
• Installation is mechanical only: no configuration, firmware or licence change on the router.

• Cisco C1121 and C1161 (C1120/C1160 families) — they need ACS-1100-RM2-19=.
• Cisco C1101 and C1109 — Cisco offers desktop, wall and (C1109) ceiling mounting only, no rack kit.
• Cisco 900 Series, 4000 or 8000 Series routers — each has its own mounting kit.
• Racks without 19-inch mounting rails, or a cabinet with no free 1RU.