Good Connections Rack Cable Guide Bracket 80 x 80 mm with Side-Offset Mounting Plate, Galvanised Steel, for 19" Uprights

The Good Connections GC-N0106 is an 80 x 80 mm cable guide bracket in galvanised steel, with a laterally offset mounting plate, that fixes to the side 19-inch uprights of a rack or cabinet and guides patch cords vertically along the side of your equipment.

Because the mounting plate is offset to the side, the bracket sits next to the rack profile instead of in front of it, so it does not cover the outermost ports of a patch panel or switch. The 4 mm galvanised wire is corrosion-resistant and smooth enough for cable bundles.

• 1 × Good Connections cable guide bracket, 80 x 80 mm, galvanised steel, with side-offset mounting plate
• Fixing screws and pack quantity are not published — standard rack screws and cage nuts are usually used

• Holds a vertical bundle of patch cords along the side of the rack, keeping the front of patch panels and switches clear.
• 80 x 80 mm opening takes a sizeable bundle of Cat6/Cat6A patch cords.
• Use several brackets at intervals up the rack for a tidy vertical cable run.
• The offset plate keeps the first and last ports of a 24- or 48-port panel accessible.

• Horizontal cable management in front of a panel — for that use a 1U cable manager with rings or a brush panel.
• Racks without free mounting holes on the side uprights.
• Large trunk bundles beyond 80 x 80 mm — use a vertical cable manager or a larger bracket.