HP 712 Original DesignJet Ink Cartridge · Black · 80 ml · Pigment Ink · for DesignJet T210/T230/T250/T630/T650 & Studio

HP HP 712 (3ED71A) is a genuine HP designjet ink cartridge in black, 80 ml, made for owners of HP DesignJet T210, T230, T250, T630, T650 and Studio printers who want the manufacturer's own ink rather than a compatible.

The 80 ml black is the large size for the DesignJet T200/T600 family and Studio plotters, where black lines and text make up most of every CAD drawing.

• 1 × HP 712 80 ml black DesignJet ink cartridge (3ED71A)

• HP rates large-format cartridges by volume (80 ml), not by pages — how far it goes depends on the size of your prints and how much of the sheet is covered. Line drawings and CAD plots use little ink; full-colour posters and renders use a lot.
• 80 ml is more than twice the 38 ml HP 712 black in the same slot — the better choice for offices plotting drawings every day.
• HP states 100-year plain-paper archivability (dark storage) for the black ink — useful for archived plans.
• The printhead is a separate part that stays in the printer — this cartridge is only the ink supply. If print quality drops while there is still ink, the fix is usually a printhead clean from the printer menu, not another cartridge.
• Installing takes a minute: when the plotter reports low ink, open the ink-cartridge cover, take out the old cartridge, shake the new one gently if the instructions on the box ask for it, and push it in until it locks. The front panel confirms the new cartridge.
• Keep spare cartridges sealed in their box at room temperature and install them before the date printed on the packaging; an opened cartridge is best used rather than stored.
• Empty HP cartridges can be returned for free recycling through HP Planet Partners where the programme is offered.

• DesignJet T120/T520 — those use HP 711.
• Colour plotting — black only; cyan, magenta and yellow are separate HP 712 cartridges.
• Any printer that is not in the compatibility list below — if your model is not listed, send us the model before ordering.