HP Poly Studio A2 Table Mic Extension Cable – Male to Female Phoenix Connector – 8 m (26 ft) – Black
HP Poly Studio A2 Table Mic Extension Cable – 8 m
The HP Poly Studio A2 Black Cable Extender for Table Mic (B42BDAA) is an 8-metre male-to-female Phoenix cable that extends the microphone run in a Studio A2 installation, typically between the A2 Audio Bridge and the first table microphone.
An 8 m Phoenix microphone extension cable is also supplied with the A2 Audio Bridge; this part is for additional reach or replacement. HP Poly Studio A2 system: up to 8 table microphones daisy-chain to one PoE-powered A2 Audio Bridge, which connects to Poly Studio G62, V72, X72, V52, X52 or X32 video bars. HP states the A2 is not backward compatible with Studio X70/X50/X30, USB or G7500 devices.
What's in the Box
- Studio A2 table mic extension cable, 8 m, male to female Phoenix, black
What It Means in Practice
- Lets the audio bridge sit in a credenza, rack or ceiling while the microphones stay on the table.
- Extensions can be combined: HP allows up to 144 m from the bridge to the last mic and up to 46 connectors in series.
- Where custom cabling is used instead, HP specifies shielded 22 AWG 1-pair stranded 100-ohm cable.
What Will Not Work
- HP states the Studio A2 system is not backward compatible with Poly Studio X70, X50, X30, USB video bars or G7500 – this cable is only useful in an A2 installation.
- It is not an analogue XLR or 3.5 mm microphone cable and does not connect to third-party mixers.