Intellinet Fiber Optic Patch Cable OM3 LC/UPC to LC/UPC Duplex Multimode 50/125 LSZH 3.0mm 1m Aqua
Brand:
Intellinet
Intellinet Fiber Optic Patch Cable OM3 LC/UPC to LC/UPC Duplex Multimode 50/125 LSZH 3.0mm 1m Aqua
€8.85 inc. VAT
750868
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Intellinet OM3 LC to LC Duplex Fibre Patch Cord — 1 m
OM3 multimodeLC/UPC to LC/UPC1 m · AquaLSZH · Ø 3.0 mm
The Intellinet 750868 is a 1 m duplex OM3 multimode fibre patch cord with LC on one end and LC on the other, for connecting multimode SR/SX transceivers, switches, media converters and patch panels. OM3 is laser-optimised 50/125 µm multimode for 850 nm short-reach optics (SR/SX transceivers) in the server room and between racks — the standard choice for 1G and 10G multimode links.
Both ends: LC — the small latching connector used by SFP, SFP+ and SFP28 transceivers and most modern patch panels.
What's in the Box
- 1 × Intellinet OM3 multimode duplex fibre patch cable, LC to LC, 1 m (supplied in a polybag)
What It Means in Practice
- Duplex means two fibres side by side, one transmit and one receive. The cord crosses Tx to Rx for you; if a link stays dark after patching, swap the two connectors on one end — it is the most common fibre patching mistake.
- 1 m is the right length inside the same rack — switch to patch panel or to the device next to it. Order the shortest length that reaches without tension — excess fibre has to be coiled in the cable manager.
- Route the cord with gentle bends and keep it away from sharp edges and door hinges; fibre loses light when bent too tightly.
- LSZH jacket — low smoke, zero halogen — the expected choice for offices, server rooms and public buildings.
- Keep the dust caps on until the moment you plug in. A dirty ferrule is the number one cause of high loss; clean the end faces if the ports have been left open.
What Will Not Work
- Singlemode optics (LR, LX, ER, BiDi) — they need a 9/125 µm singlemode (OS2) cord; multimode fibre does not substitute.
- Patching into an existing 62.5/125 µm (OM1) installation — core sizes must match end to end.
- Ports with SC, ST, MTP/MPO connectors — this cord terminates in LC on both ends only.
- Green APC (8° angled) ports, as found on many FTTH/GPON terminals — this cord is UPC; you need an APC cord there.
- Copper RJ45 ports — fibre needs an SFP/fibre port or a media converter on each side.
Key Features
Connectors
LC on both ends, UPC polish.
Fibre grade
OM3 multimode, 50/125 µm.
Jacket
LSZH, 3.0 mm outer diameter, aqua — the colour code most installers expect for OM3.
Quality
Ceramic UPC ferrules with published insertion loss ≤ 0.25 dB and return loss ≥ 35 dB; supplied in a polybag.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
Fibre patch cords are chosen by three things: the fibre grade (it must match the optics), the connector on each end and the polish. OM3 with LC to LC is the combination this cord covers. Need the active side as well? Browse our switches with SFP ports and match the transceiver to multimode fibre.
✓ Buy it if you need a 1 m OM3 multimode link with LC on both ends and UPC ports.
✕ Skip it if your optics are singlemode (LR/LX/BiDi), your ports are APC (green), or you need a different connector on either end.
→ Also consider the Intellinet OM3 LC to ST cord (751117) when the far end is an ST panel, or a longer OM3 LC/LC cord for rack-to-rack runs.
Not sure which grade or connector you have? Send us the model of your switch, transceiver or panel and we will check it before you order.
Features - Intellinet - 750868
Colour
Cyan
Length
1.0m
More Details
Product Code
04:194143
EAN Code
0766623750868
Manufacturer
Intellinet