Intellinet Fibre Optic Patch Cable OM1 Multimode, LC/UPC to ST/UPC Duplex, 62.5/125 µm, 5m, LSZH 3.0 mm, Orange
Brand:
Intellinet
Intellinet Fibre Optic Patch Cable OM1 Multimode, LC/UPC to ST/UPC Duplex, 62.5/125 µm, 5m, LSZH 3.0 mm, Orange
€7.32 inc. VAT
471336
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Intellinet OM1 Multimode Fibre Patch Cable — LC/UPC to ST/UPC, Duplex, 5 m
OM1 62.5/125 µmLC – ST UPC5 m DuplexLSZH Orange
The Intellinet 471336 is a 5 m duplex OM1 multimode fibre optic patch cable with LC/UPC on one end and ST/UPC on the other, built on 62.5/125 µm fibre in a LSZH orange jacket, 3.0 mm in diameter. It is made for maintaining existing 62.5/125 µm OM1 multimode installations, such as older campus backbones, patch panels and legacy equipment.
LC is the small-form connector used by SFP/SFP+ transceivers and most current switch and media-converter fibre ports. ST is the round bayonet (twist-lock) connector found on older patch panels and legacy equipment. So this cable bridges an LC port on one side and an ST port on the other — check both ends before ordering.
Before you order: This is OM1 62.5/125 µm multimode. Use it with multimode optics (SR/SX, 850 nm) and match the fibre type already installed — do not mix it with singlemode or 50/125 µm OM2–OM4 fibre.
What's in the Box
- 1 × Intellinet duplex fibre optic patch cable, LC/UPC – ST/UPC, 5 m
- Supplied in a polybag
- Transceivers, couplers and cleaning tools are not included
What It Means in Practice
- Duplex means two fibres: one transmits, one receives. If the link does not come up, transmit and receive are usually crossed — swap the two connectors at one end (A↔B) or use a coupler with the correct polarity.
- 5 m is the end-to-end length. Measure the route including slack in cable managers and trays before ordering — fibre should never be pulled tight or kinked.
- Minimum bend radius is 30 mm — keep loops wider than that in racks, boxes and trays.
- On OM1, 10GBASE-SR is only specified to 33 m; OM1 is mainly for keeping legacy links running, not for new 10G installs.
What Will Not Work
- It will not work with singlemode or 50/125 µm OM2–OM4 fibre or with singlemode optics.
- It does not mate correctly with APC (green, angled) ports or couplers.
- It does not plug into SC, MPO ports. If one end of your link is different, tell us the ports and we will match the right cable.
- It is an indoor patch cord, not an outdoor or direct-burial cable.
Key Features
Fibre
OM1 multimode 62.5/125 µm; insertion loss ≤ 0.25 dB, return loss ≥ 35 dB.
Connectors
LC/UPC to ST/UPC, duplex, Ceramic ferrules.
Jacket
LSZH (low smoke, zero halogen), 3.0 mm, orange — suited to offices, server rooms and public buildings.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
Most fibre faults we see come from three mismatches: singlemode versus multimode, UPC versus APC, and the wrong connector at one end. This Intellinet cord is OM1, UPC, LC to ST — confirm those three on both devices and it will simply work. For the equipment side, see our network switches.
✓ Buy it if your link is OM1 multimode, both ports are LC and ST with UPC polish, and 5 m covers the route with a little slack.
✕ Skip it if either end uses a different connector or polish, your transceivers are singlemode (LX/LR), or you need an outdoor-rated cable.
→ Also consider the same cable in another length, or a coupler/patch panel if you are extending an existing run.
Not sure it fits your setup? Send us the model of your rack, switch or device and we will check compatibility before you order.
Features - Intellinet - 471336
Colour
orange
Length
5m
More Details
Product Code
04:193999
EAN Code
0766623471336
Manufacturer
Intellinet