Kingston FURY Beast DDR5-6000 CL30 32GB Kit (2x16GB) Desktop Memory, AMD EXPO & Intel XMP, Black

The Kingston FURY Beast KF560C30BBEK2-32 is a two-module 32GB kit (2 x 16GB) of DDR5 desktop memory rated at 6000 MT/s with CL30-36-36 timings at 1.4V, aimed at gamers and builders upgrading an AMD AM5 or Intel DDR5 desktop.

Out of the box it boots at the default 4800 CL40-39-39 at 1.1V; the rated 6000 MT/s speed is applied by enabling the AMD EXPO & Intel XMP 3.0 profile in the BIOS. The black heat spreader has no RGB lighting, for a clean, lower-profile build.

DDR5 at 6000 MT/s gives noticeably more bandwidth than DDR4, which helps in CPU-bound games, content creation and heavy multitasking; lower CAS latency (CL30) shortens the time the CPU waits for data. As a matched kit, the two modules are tested together at the rated profile.

• 2 x 16GB Kingston FURY Beast DDR5 modules (black), tested together as a matched kit
• Manufacturer retail packaging
• No screws, cables or drivers needed — memory installs straight into the DIMM slots

• First boot runs at 4800 CL40-39-39 at 1.1V. Enable AMD EXPO & Intel XMP 3.0 in the BIOS to get 6000 MT/s — skipping this step is the most common reason new memory “feels slow”.
• Two 16GB modules fill two slots for dual-channel operation. On a four-slot board use the slots your motherboard manual marks for two-DIMM operation (usually A2 and B2).
• Module height is 34.9 mm including the heat spreader — check clearance under large air coolers whose front fan overhangs the memory slots.
• Adding more modules later is possible on four-slot boards, but four DDR5 modules usually run at lower speeds than two; if you need more than 32GB, buying the full capacity as one kit is the safer route.
• Update the motherboard BIOS before fitting new DDR5. The first boot after installing memory can take noticeably longer while the board trains the memory — this is normal, not a fault.
• 32GB is a comfortable amount for current games, streaming alongside gaming, photo editing and everyday multitasking; video editing, large datasets or virtual machines benefit from 64GB or more.
• If the rated profile is not stable on your system, the second profile (5600 CL40 at 1.25V) gives you a tested fallback without manual tuning.

• DDR4 motherboards — DDR5 modules are keyed differently and will not physically fit.
• Laptops, mini PCs and all-in-ones that use SO-DIMM or soldered memory — this is a full-size 288-pin desktop module.
• Servers and workstations that require registered (RDIMM) or ECC memory — this is non-ECC unbuffered memory (on-die ECC only).
• Guaranteed rated speed with four modules installed — the rated profile is validated for the modules as supplied in the kit, not for mixed or four-module setups.