NETGEAR Nighthawk USB2ETH — Nighthawk USB-C to Gigabit Ethernet Adapter
Gigabit EthernetUSB-C60 W pass-throughNighthawk M-series
The NETGEAR Nighthawk USB2ETH is an USB-C to Gigabit Ethernet adapter with USB-C power pass-through that adds a wired Gigabit Ethernet port to a laptop, desktop PC, tablet or thin client through its USB-C port. NETGEAR designed it for its Nighthawk mobile hotspots: plugged into an M-series hotspot it adds a wired Gigabit port for a PC, router or switch, and it also works with Windows, macOS and Linux computers. A USB-C port on the adapter passes up to 60 W of power through. It connects at 10/100/1000 Mbps. It draws its power from the USB port, so there is no separate power supply to carry. A cable connection is the dependable answer when Wi-Fi is weak, crowded or not allowed, when a slim laptop has no network socket, or when backups, large downloads and video calls need a steady, low-latency link.
Compatibility — check before buying:
Check the port: the adapter has a USB-C plug and does not fit USB-A ports; any USB-C data port works, including Thunderbolt 3/4 and USB4 ports. It links at up to 1 Gbps with any standard switch or router port, and Cat5e cable or better is enough. Nighthawk hotspots need their latest firmware. A USB-C charger is not included. Operating systems listed by NETGEAR: Windows XP/Vista/7/8/10/11, macOS 10.5 and later, Linux; NETGEAR Nighthawk M3, M6, M6 Pro, M7, M7 Pro, M7 Ultra mobile hotspots (latest firmware). Not sure it suits your laptop, dock or switch? Tell us the model and we check it.
Best For
✓ Laptops without an Ethernet port
✓ Stable video calls and remote desktop
✓ Office desks and hot desks
✓ Backups and large downloads
✓ Replacing a faulty built-in port
✓ IT toolkits and travel bags
Key Features
Gigabit Ethernet
Up to 1000 Mbps full duplex for steady calls, cloud work and file transfers; falls back to 100/10 Mbps automatically.
USB-C plug
Fits the USB-C port of current laptops, tablets and PCs, including Thunderbolt 3/4 and USB4 ports.
Network features
Hot-swappable and driver-free; adds a wired LAN port or a failover link to a Nighthawk mobile hotspot.
60 W pass-through
A USB-C port on the adapter lets you connect power while it is in use.
Technical Specifications
| Identification |
| Brand |
NETGEAR |
| Product |
NETGEAR Nighthawk USB-C to Ethernet Adapter (USB2ETH) |
| Part Number |
USB2ETH-10000S |
| EAN / GTIN |
0606449172676 |
| Model |
USB2ETH |
| Network |
| Ports |
1× RJ45 Gigabit Ethernet |
| Speeds |
10/100/1000 Mbps |
| Features |
hot-swappable, no driver needed |
| Host Connection |
| Connector |
USB-C (5 Gbps) |
| USB |
USB 3.1 Type-C host port required |
| Power |
USB bus powered |
| USB-C pass-through |
1× USB-C power pass-through, up to 60 W (20 V / 3 A) |
| Compatibility |
| Operating Systems |
Windows XP/Vista/7/8/10/11, macOS 10.5 and later, Linux; NETGEAR Nighthawk M3, M6, M6 Pro, M7, M7 Pro, M7 Ultra mobile hotspots (latest firmware) |
| Physical |
| Cable |
10 cm |
| Dimensions |
50 × 45 × 14 mm |
| Weight |
22.7 g |
| In the Box |
| Included |
Nighthawk USB-C to Ethernet adapter |
| Not Included |
USB-C charger, network cable |
| Warranty |
| Warranty |
1-Year Warranty (Singular) |
| Manufacturer Term |
NETGEAR states a limited warranty on its product page but does not publish its length for this adapter. Singular’s direct warranty is 1 year; beyond that we assist you with the manufacturer’s warranty process for its full duration. |
Frequently Asked Questions
Do I need to install a driver?
Supported systems listed by NETGEAR: Windows XP/Vista/7/8/10/11, macOS 10.5 and later, Linux; NETGEAR Nighthawk M3, M6, M6 Pro, M7, M7 Pro, M7 Ultra mobile hotspots (latest firmware). Where the system does not load a driver on its own, install the driver from the NETGEAR support page for this model.
Is it faster than Wi-Fi?
A wired Gigabit link gives up to 1 Gbps with steadier latency than most Wi-Fi connections — that is what video calls, remote desktop and large transfers benefit from. Your internet speed still depends on your connection.
Can I use it on a USB-A port?
No, it has a USB-C plug only. For USB-A computers choose a USB-A version.
Does it work through a dock or USB hub?
Usually yes — it is a standard USB network device. For full speed the hub or dock port must be USB 3.x, and bus-powered hubs should have enough power for all connected devices.
Singular Expert Insight
We suggest the Nighthawk USB2ETH for Nighthawk M-series 5G/4G hotspot users who want to plug a router, switch or desktop PC into the mobile connection with a cable. Browse more
network cards or
network switches. Local support in Cyprus comes with every order.
Buyer’s Guide
Buy it if
You use a Nighthawk M3/M6/M7 hotspot or need a USB-C Gigabit adapter with power pass-through.
Skip it if
You need 2.5G speed.
Also consider
StarTech.com 1GPD3 — USB-C Gigabit with 100 W PD pass-through.
