Philips 43BDL4050Q/00 - 43-inch 4K UHD Signage Display
43-inch marketed; 4K UHD, 60 Hz optimum24/7 indoor, landscape or portraitAndroid 10; 3 GB RAM; 16 GB storage2 × HDMI 2.0; DVI-I
The Philips 43BDL4050Q/00 is a non-touch 43-inch commercial signage display, with a 42.5-inch visible area and Android 10 signage system. It is designed for continuous indoor use in landscape or portrait orientation. Compatible Android/USB content can play without an external media player; other workflows may require a separate player or software.
Best For: A fit for indoor venues that need a 24/7 signage display in landscape or portrait orientation, with 4K resolution and integrated Android media playback. Check the required inputs and content workflow before choosing it.
Before you order: This is a non-touch indoor display, not a complete Windows PC or consumer TV. The CRD22 Wi-Fi module and Philips ScreenShare software are separate options. A wall mount or stand, HDMI/network cables, USB storage and PC are not included. Check mount load, fastener depth, ventilation and orientation; operating conditions are 0–40°C and 20–80% RH non-condensing. Confirm that the supplied power-cord plug is suitable for your local sockets.
What's in the Box
- Display
- RS232 daisy-chain cable
- RS232 cable
- Philips logo
- AC power cord
- AC switch cover
- Quick start guide
- Remote control and AAA batteries
- USB cover and screws
What It Means in Practice
- The 24/7 rating applies to indoor commercial signage in both landscape and portrait orientations; it does not establish outdoor or weatherproof suitability.
- Android 10, 3 GB system memory and 16 GB internal storage support playback of compatible media. This is not a complete Windows PC, and other workflows may need separate software or a player.
- FailOver can switch between primary and secondary inputs when a source fails; it does not provide battery backup, network redundancy or a zero-downtime guarantee.
- For installation, account for the 973.0 × 561.2 × 63.5 mm set dimensions, 11.1 kg weight and VESA 200 × 200 mm M6 pattern. Confirm bracket load, fastener depth, ventilation and the required orientation.
What Will Not Work
- No touch capability.
- No built-in Wi-Fi is established; the CRD22 Wi-Fi module is optional and separate.
- CRD22 Wi-Fi module and Philips ScreenShare software are separate; Wave-ready status does not establish an included paid tier or perpetual licence.
- Wall mount/stand, HDMI cable, network cable, USB storage, PC, external amplifier and external speakers are not included.
- FailOver is not battery backup or network redundancy and does not guarantee zero downtime.
- The display is specified for indoor use; outdoor/weatherproof and full-sunlight suitability are not established.
Key Features
24/7 commercial operation
Designed for continuous indoor signage use in landscape or portrait orientation.
Integrated Android signage system
Android 10 with quad-core Cortex-A55, G52 MC1, 3 GB system memory and 16 GB storage.
FailOver input switching
Can switch primary and secondary inputs if a source fails; it is not backup power or network redundancy.
Integrated audio
Two 10 W RMS speakers provide 20 W total output.
Technical Specifications
| Manufacturer | Philips |
| Model | 43BDL4050Q/00 |
| Manufacturer SKU | 43BDL4050Q/00 |
| EAN | 8721038101713 |
| Display size | 43-inch marketed; 42.5-inch / 108 cm visible |
| Panel | ADS |
| Resolution and refresh rate | 3840 × 2160; 60 Hz optimum |
| Aspect ratio | 16:9 |
| Brightness | 500 cd/m² |
| Haze | 25% |
| Typical contrast ratio | 1200:1 |
| Typical response time | 8 ms |
| Display colours | 1.07 billion |
| Viewing angle | 178° |
| Touch | Non-touch display |
| Operating duty and orientation | 24/7; landscape and portrait |
| Intended environment | Indoor commercial signage |
| System | Android 10 integrated signage SoC |
| Processor | Quad-core Cortex-A55 |
| Graphics | G52 MC1 |
| System memory | 3 GB DDR |
| Internal storage | 16 GB |
| Video inputs | 2 × HDMI 2.0; 1 × DVI-I |
| USB | 3 × USB-A: 2 × USB 2.0 and 1 × USB 3.0 |
| Card slot | microSD |
| Audio connections | 3.5 mm audio in and out |
| Network and control | RJ45 network control; RS232C in/out via 2.5 mm jack; IR in/out via 3.5 mm jack |
| Wireless option | Optional separate CRD22 Wi-Fi module |
| Remote management | Wave-ready for Philips Wave ecosystem; included paid tier or perpetual licence not established |
| FailOver | Can switch primary/secondary inputs if the source fails; not battery backup or network redundancy |
| Tiled matrix | Up to 3 × 3 capability with suitable installation and content |
| Integrated speakers | 2 × 10 W RMS; 20 W total |
| Power input | 100–240 V AC, 50/60 Hz |
| Standby power | <0.5 W |
| Energy label | EPREL 2242412; class F; 43 kWh/1000 h |
| Dimensions (set) | 973.0 × 561.2 × 63.5 mm |
| Weight | 11.1 kg |
| Bezel | 13.9 mm, even bezel |
| VESA mount | 200 × 200 mm, M6 |
| Operating conditions | 0–40°C; 20–80% RH, non-condensing |
| Storage temperature | −20–60°C |
| MTBF | 50,000 hours statistical metric; not a guaranteed lifetime |
Frequently Asked Questions
Is this a touchscreen or TV?
No. It is a non-touch commercial signage display, not a consumer TV.
Is Wi-Fi included?
The CRD22 Wi-Fi module is an optional separate item. Built-in Wi-Fi is not established.
Does the display include a wall mount or stand?
A wall mount or stand is not listed among the confirmed included items. Check bracket compatibility, load, fastener depth, ventilation and orientation before installation.
What does FailOver do?
It can switch from a primary to a secondary input if the source fails. It does not provide battery backup or network redundancy, or guarantee zero downtime.
Singular Expert Insight
Its appeal is the combination of commercial 24/7 operation, portrait or landscape placement, 4K UHD and an integrated Android signage system in one display. FailOver can switch between primary and secondary inputs when a source fails, but does not guarantee uninterrupted service.
Buyer’s Guide
✓ Buy it if A fit for indoor venues that need a 24/7 signage display in landscape or portrait orientation, with 4K resolution and integrated Android media playback. Check the required inputs and content workflow before choosing it.
✕ Skip it if This is a non-touch indoor display, not a complete Windows PC or consumer TV. The CRD22 Wi-Fi module and Philips ScreenShare software are separate options. A wall mount or stand, HDMI/network cables, USB storage and PC are not included. Check mount load, fastener depth, ventilation and orientation; operating conditions are 0–40°C and 20–80% RH non-condensing. Confirm that the supplied power-cord plug is suitable for your local sockets.