TP-Link Deco BE22 BE3600 Dual-Band Wi-Fi 7 Whole Home Mesh System 3-Pack
Brand:
TP-LINK
Deco BE22(3-pack)(EU)
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
TP-Link Deco BE22 — BE3600 Whole Home Mesh Wi-Fi 7 3-Pack
BE3600 Wi-Fi 73-unit mesh systemMulti-Link Operation2x Gigabit per unit
The TP-Link Deco BE22 (3-pack)(EU) is a BE3600 dual-band Wi-Fi 7 whole-home mesh system supplied as three identical Deco units. Each unit supports physical wireless rates of up to 688 Mbps on 2.4 GHz and 2882 Mbps on 5 GHz, with Wi-Fi 7 technologies including Multi-Link Operation, 4K-QAM, Multi-RUs and 160 MHz channels. TP-Link rates the three-unit system for whole-home coverage of up to 6,500 sq. ft. and laboratory-tested connectivity for more than 150 devices.
Compatibility — check before buying:
The Deco BE22 is a dual-band 2.4 GHz and 5 GHz Wi-Fi 7 system; it does not provide a 6 GHz radio. Each unit has two Gigabit Ethernet ports, so Internet and wired backhaul performance can be limited by Gigabit Ethernet even though the combined Wi-Fi PHY rate is higher. The three-pack includes three power adapters and one RJ45 Ethernet cable.
Best For
✓ Large homes needing seamless mesh coverage
✓ Homes upgrading to Wi-Fi 7 clients
✓ Multi-room streaming and gaming
✓ Networks with many smart-home devices
✓ Ethernet or wireless mesh backhaul
✓ Router or Access Point mode
Key Features
BE3600 dual-band Wi-Fi 7
TP-Link specifies up to 2882 Mbps on 5 GHz and 688 Mbps on 2.4 GHz. These are maximum physical wireless link rates; actual throughput depends on client capability, network traffic, interference and environmental conditions.
Multi-Link Operation and 4K-QAM
Wi-Fi 7 Multi-Link Operation can use multiple bands and channels with compatible clients, while 4K-QAM and Multi-RUs improve spectral efficiency and available link capacity where supported by the connected device.
Flexible wired and wireless backhaul
Each Deco has two auto-sensing Gigabit WAN/LAN ports. Deco units can connect through wireless mesh or Ethernet backhaul, and TP-Link also supports combined wireless and wired backhaul between units.
AI-driven mesh and HomeShield
Deco creates a unified mesh network and uses AI-driven roaming to optimize connections as devices move around the home. TP-Link HomeShield provides network security, parental controls and IoT protection, with some advanced functions requiring a subscription.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The Deco BE22 is an interesting Wi-Fi 7 option for homes that want newer wireless features without paying for a tri-band 6 GHz mesh system. MLO, 4K-QAM and 160 MHz operation bring genuine Wi-Fi 7 capabilities, while the three-unit bundle is designed for broad whole-home coverage. The important limitation is on the wired side: every unit has two Gigabit ports rather than multi-gigabit Ethernet, so a connection faster than 1 Gbps cannot pass through a single wired port at full rate. It is therefore best viewed as a high-capacity whole-home mesh system rather than a solution for multi-gigabit wired Internet service.
Buyer’s Guide
Buy it if
You need a three-node Wi-Fi 7 mesh system with broad home coverage, MLO, 160 MHz channels, WPA3 and flexible Ethernet or wireless backhaul.
Skip it if
You specifically require 6 GHz Wi-Fi or multi-gigabit Ethernet ports. The Deco BE22 is dual-band and its wired interfaces are limited to 1 Gbps each.
Check before ordering
This SKU is the EU three-pack with three Deco BE22 units and three power adapters. Confirm that dual-band Wi-Fi 7 and Gigabit Ethernet meet your Internet and LAN requirements.
Features - TP-LINK - Deco BE22(3-pack)(EU)
More Details
Product Code
04:575150
EAN Code
1210002602792
Manufacturer
TP-LINK