Ubiquiti UniFi Retrofit Hub, two-door access control
Brand:
Ubiquiti
UA-Retrofit-Hub-2
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Ubiquiti UniFi Retrofit Hub - two-door access control
Up to 2 doorsWiegand and OSDP2 × 10/100 MbE RJ4512/24 V DC; supply separate
The Ubiquiti UniFi Retrofit Hub (UA-Retrofit-Hub-2) is an indoor access-control hub for managing up to two doors through UniFi Access. It supports Wiegand and OSDP readers, but requires a suitable separately purchased DC supply, compatible management installation, and separately selected readers and locks.
Best For: For an indoor installation adding access control to up to two doors, where a compatible UniFi Access management installation and separately selected readers, locks and suitable DC power are arranged.
Before you order: This is a hub, not a reader or complete access kit. A suitable 12/24 V DC supply is sold separately, as are readers and electric locks; an appropriately designed Access installation is required. The hub is indoor-only and is not PoE-powered. Check each lock's voltage/current requirements and cable distance against wire gauge and load; the stated limits are not a combined accessory power budget.
What's in the Box
- One Ubiquiti UniFi Retrofit Hub
- One mounting piece/bracket
- Two anchors
- Two M4 screws
What It Means in Practice
- Plan for a suitable external 12/24 V DC supply; the hub is not PoE-powered, and the supply is sold separately.
- Choose readers and locks separately and confirm their interface and electrical requirements; Wiegand and OSDP support does not guarantee compatibility with every third-party reader.
- Cable-distance limits vary with connected load and wire gauge. For example, the specified 152.4 m limit applies to a 250 mA UA-Retrofit-Reader with 18 AWG UACC cable, not to locks.
- The included mounting piece supports DIN-rail mounting; the package does not establish that a full-length rail is included.
What Will Not Work
- Indoor use only; operating range is -10 to 40 °C with 5–90% non-condensing humidity.
- Requires a suitable external 12/24 V DC supply, sold separately; PoE input is not established.
- Readers, electric locks, exit buttons, sensors, network cable, gateway/controller and switch are not included and may be required for the installation.
- Two Ethernet ports are 10/100 MbE, not Gigabit.
- Relay and power-output ratings are specific to each output: dry lock/AUX relays 30 V DC up to 1 A each; powered lock output 12 V DC up to 1 A or 24 V DC up to 0.5 A; reader output 12 V DC up to 0.5 A. These are not a shared total budget.
- Cable-distance limits depend on load and wire gauge; there is no universal maximum cable length. The 250 mA reader example must not be applied to locks.
Key Features
Two-door control
One hub supports access control for up to two doors and up to 10,000 users.
Wiegand and OSDP readers
Supports both reader interfaces; confirm the specific third-party reader's compatibility.
Separate lock and AUX relays
Two lock relay outputs and two AUX relay outputs support the shown control connections, subject to their individual electrical ratings.
DIN-rail mounting
DIN-rail mounting is included, alongside the listed mounting piece, anchors and screws.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
One hub supports two doors and Wiegand or OSDP readers, with dedicated door inputs and lock/AUX relay connections. Its two Ethernet ports are 10/100 MbE, not Gigabit.
Buyer’s Guide
✓ Buy it if For an indoor installation adding access control to up to two doors, where a compatible UniFi Access management installation and separately selected readers, locks and suitable DC power are arranged.
✕ Skip it if This is a hub, not a reader or complete access kit. A suitable 12/24 V DC supply is sold separately, as are readers and electric locks; an appropriately designed Access installation is required. The hub is indoor-only and is not PoE-powered. Check each lock's voltage/current requirements and cable distance against wire gauge and load; the stated limits are not a combined accessory power budget.
Features - Ubiquiti - UA-Retrofit-Hub-2
Colour
white
Interface
- Ethernet
More Details
Product Code
04:596968
Manufacturer
Ubiquiti