UISP Console
Gateway + Switch2x 10G SFP+8,500 Mbps NAT
The Ubiquiti UISP Console is an all-in-one host console combining a multi-gigabit Ethernet gateway, an integrated managed switch and a built-in UISP controller for small-to-mid-sized ISP or enterprise deployments. It offers 9x Gigabit RJ45 ports plus 2x 10G SFP+ uplinks, routing up to 8,500 Mbps of NAT throughput (2,250 Mbps with QoS enabled, 7,500 Mbps with IP accounting). A 1U rack or wall-mountable chassis and a TransPort DC input for power redundancy make it suited to always-on network cores. Typically in stock with fast delivery across Cyprus.
Compatibility note: the UISP Console runs the UISP platform and does not integrate with UniFi Network controllers or vice versa — it is a separate Ubiquiti ecosystem intended for ISP/WISP-style network management.
Best For
✓ Small-to-mid ISP/WISP network cores
✓ Sites needing routing + switching in one box
✓ UISP-managed deployments
✓ High-throughput NAT/firewall routing
✓ Networks wanting 10G SFP+ uplinks
✓ Deployments needing power redundancy
Key Features
Integrated Gateway + Switch
Combines routing, NAT and an integrated Layer 2 switch in a single 1U appliance, reducing rack space and cabling.
Up to 8,500 Mbps NAT Throughput
High-performance routing engine handles demanding traffic loads, scaling down gracefully with QoS or IP accounting enabled.
Built-In UISP Controller
Hosts the UISP management platform directly on the device, monitoring and configuring the wider UISP network.
Technical Specifications
| Identification |
| Part Number |
UISP-CONSOLE |
| EAN / GTIN |
0810010077752 |
| Networking |
| Ports |
9x GbE RJ45 + 2x 10G SFP+ |
| NAT Throughput |
Up to 8,500 Mbps |
| With QoS Enabled |
Up to 2,250 Mbps |
| With IP Accounting |
Up to 7,500 Mbps |
| Power & Physical |
| Power |
External AC/DC adapter included; TransPort DC input for redundancy |
| Mounting |
1U rack-mountable or wall-mountable |
Frequently Asked Questions
Does the UISP Console work with UniFi Network?
No, it runs the separate UISP platform and does not integrate with UniFi Network controllers.
Why does throughput drop with QoS or IP accounting enabled?
Both features add processing overhead; the 8,500 Mbps maximum applies with these features off, dropping to 2,250-7,500 Mbps depending on which is active.
Can I power it redundantly?
Yes, alongside the included AC/DC adapter, a TransPort DC input allows a secondary power source for redundancy.
Singular Expert Insight
If you plan to run QoS or detailed IP accounting, budget for reduced throughput versus the headline 8,500 Mbps figure — size your deployment around the feature set you actually need enabled.
Buyer's Guide
Buy it if: you run or are building a UISP-managed network and need routing plus switching in one appliance.
Skip it if: you use UniFi Network — look at a UniFi Cloud Gateway or Dream Machine instead.
Also consider: UISP Router Pro for higher-throughput deployments needing more SFP+ ports.