Special B2B pricing available after sign-in
Sign in Register
0Cart

Wantec 7226 wantecWire Extreme Slim Cat 6A U/UTP Patch Cable 0.2 m White 2.8 mm Round Highly Flexible RJ45 Patch Cord

Brand:
Wantec
WANTEC 7226 - 0.2 m - Cat6a - U/UTP (UTP) - RJ-45 - RJ-45 - Extre
Wantec 7226 wantecWire Extreme Slim Cat 6A U/UTP Patch Cable 0.2 m White 2.8 mm Round Highly Flexible RJ45 Patch Cord
€3.31 inc. VAT
Buy
7226
€2.78
€3.31 inc. VAT
Ships from EU stock: 2 item(s)
+ −
Add to wish list Ask a question
Product Code
04:402780
EAN Code
4250367772263
Manufacturer
Wantec
Quick Specs
Standard
Cat 6A U/UTP
Length
0.2 m
Diameter
2.8 mm extreme slim
Colour
White
Delivery

Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
✓ Bank Deposit
Secure checkout with flexible payment methods
Trusted Tech Choice
Buying Benefits Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support

Wantec 7226 Extreme Slim Cat 6A Patch Cable — 0.2 m White

wantecWire 2.8 mm round U/UTP patch cord for crowded racks and short switch-to-panel jumps.
Cat 6A0.2 m2.8 mm slimU/UTPRJ45 to RJ45

The Wantec 7226 is a wantecWire extreme slim, round U/UTP Cat 6A patch cord with a 2.8 mm outer diameter and a length of 0.2 m in white — built for short jumps between a patch panel and a switch in dense 19-inch racks.

At roughly half the diameter of a standard patch cable, the cord bends tightly, leaves room for airflow and keeps high-density panels readable. Part number 7226 (EAN 4250367772263) is the white 0.2 m member of the wantecWire extreme slim family, which is offered in several colours and lengths so you can colour-code VLANs, uplinks or PoE ports. Typically in stock with fast delivery across Cyprus.

Before you buy — compatibility notes
This is a Cat 6A-rated unshielded (U/UTP) cord with standard RJ45 plugs — it fits any RJ45 switch, patch panel, router or NIC. Wantec does not publish conductor gauge, jacket material, bandwidth figure or a PoE class for this 2.8 mm line, so treat it as a short data jumper: slim cords use thinner conductors than standard 6 mm cable, which matters for long runs and high-power PoE, but at 0.2 m the effect is negligible. For shielded (STP) installations with earthed panels, choose a shielded S/FTP cord instead.

Key Features

 
Extreme slim 2.8 mm
The round 2.8 mm jacket takes a fraction of the space of a standard 6 mm cord, so fully populated 24- and 48-port panels stay tidy and front-to-back airflow is not blocked.
 
Highly flexible
Wantec specifies the cord as highly flexible — it follows tight bends between panel and switch without springing back or stressing the RJ45 latches.
 
Colour-coding ready
Available in several colours at the same 0.2 m length, so white can mark a specific VLAN, uplink, server or PoE group at a glance.

Technical Specifications

Identification
Part Number 7226
EAN / GTIN 4250367772263
MPN 7226
Cable
Category Cat 6A (as specified by Wantec)
Shielding U/UTP — unshielded twisted pair, no foil or braid
Construction Round, extreme slim, highly flexible
Outer Diameter 2.8 mm
Length 0.2 m
Colour White
Connectors
Connector 1 RJ45 (8P8C) male
Connector 2 RJ45 (8P8C) male
Data Rate Up to 10 Gbit/s (Cat 6A class, per distributor data)
Not published by the manufacturer
Conductor / AWG Not published
Jacket material Not published
Bandwidth (MHz) Not published
PoE class Not published

Frequently Asked Questions

Does the Wantec 7226 work with my switch and patch panel?
Yes. It has a standard RJ45 plug at both ends and works with any Ethernet switch, router, patch panel, NIC or wall outlet with an RJ45 port. At 0.2 m it is sized for panel-to-switch patching in the same rack unit area.
Is the Wantec 7226 suitable for 10 Gigabit Ethernet?
It is sold as a Cat 6A cord, the category designed for 10GBASE-T, and at 0.2 m it uses only a tiny part of the 100 m channel budget. Because it is unshielded, keep it away from heavy EMI sources, and use a shielded cord if your cabling system is shielded end to end.
What is the difference between the Wantec 7226 and a standard Cat 6A patch cable?
The main difference is the 2.8 mm diameter versus roughly 6 mm on a standard cord. That makes it far easier to route in dense panels, at the cost of thinner conductors — irrelevant for short patch leads, but not the right choice for long runs or high-power PoE.
Singular Expert Insight
The Wantec 7226 earns its place in high-density racks where standard 6 mm cords turn a patch field into a wall of cable. For 0.2 m jumps between a patch panel and network switches directly below it, the 2.8 mm U/UTP build is easier to dress than any shielded cord and the white jacket makes colour-coding simple. If your installation uses shielded panels and earthed switches, pick a shielded Cat 6A S/FTP cord instead so the shield chain is not broken.

Buyer's Guide

Buy it if
You patch 1U panels to switches directly below and want 0.2 m white cords that are only 2.8 mm thick.
Skip it if
Your cabling is fully shielded (S/FTP panels) or you need a published PoE++ rating — a shielded 6 mm Cat 6A cord is the safer choice.
Also consider
Longer wantecWire extreme slim lengths in the same colour, or a shielded Cat 6A S/FTP patch cord for earthed installations.

Features - Wantec - 7226

Colour
white
Length
0.2m
Standard
CAT6a
More Details
Product Code
04:402780
EAN Code
4250367772263
Manufacturer
Wantec
Find similar
  • Recently Viewed
  • Customers Also Bought
 
Why Buy from Singular

Trusted by businesses across Cyprus

Genuine products, EU stock, and expert support for every purchase.
✓ Genuine Products
Sourced through official distribution channels, with full manufacturer warranty.
✓ EU Stock
Shipped from our EU distribution network, with real-time availability on every product.
✓ B2B Ready
VAT invoices for business deduction and credit terms for verified buyers.
Expert Support
Talk to our team for sizing, configuration or volume orders.