Wera Click-Torque A 6 Set 1 Torque Wrench Set 20 Pieces 2.5-25 Nm 1/4 Inch Hex Drive with Bits and Sockets
Brand:
Wera
Wera Click-Torque A 6 Set 1 Torque Wrench Set 20 Pieces 2.5-25 Nm 1/4 Inch Hex Drive with Bits and Sockets
€292.1 inc. VAT
05130110001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Wera Click-Torque A 6 Set 1 — 2.5–25 Nm torque wrench with 11 bits and 6 Zyklop sockets
2.5–25 Nm, +/-4%DIN EN ISO 6789-1:20171/4 inch hex drive20 pieces in a textile box
The Wera Click-Torque A 6 Set 1 (part number 05130110001) is a 20-piece low-range torque set built around the Click-Torque A 6, a 2.5 to 25 Nm click wrench rated by Wera at plus or minus 4 percent in accordance with DIN EN ISO 6789-1:2017-07. It ships with six TORX bits, four hex bits, a Phillips bit, six Zyklop sockets from 6 to 13 mm, a 1/4 inch square adaptor and a free-turning extension, all in a compact textile box. It suits bicycle and e-bike assembly, electronics and IT hardware, appliance and furniture work and anywhere a small fastener has a stated torque value. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
The wrench itself has a 1/4 inch hexagon bit drive, not a square drive; the supplied 870/1 adaptor converts it to 1/4 inch square so the Zyklop sockets and the extension can be used. The six sockets are 6, 7, 8, 10, 12 and 13 mm — 9 and 11 mm are not included, so do not read the range as continuous. Torque is measured for right-hand tightening; the ratchet reverses for run-down. Wera does not state that a calibration certificate is supplied, so assume none is included. Not insulated, not VDE-tested, and never to be used as a breaker bar.
Best For
✓ Bicycle and e-bike assembly and servicing
✓ Electronics, IT and server hardware
✓ Appliance, furniture and machine assembly
✓ Carbon components with a printed torque value
✓ Automotive interior and trim fasteners
✓ Technicians needing one compact low-torque kit
Key Features
2.5 to 25 Nm at plus or minus 4 percent
Wera specifies precision of plus or minus 4 percent in accordance with DIN EN ISO 6789-1:2017-07 across the full 2.5 to 25 Nm range, which is the band where carbon bicycle parts, electronics housings and small machine fasteners live and where over-tightening does visible damage.
Two clicks: one to set, one to release
Wera builds in an audible and tactile click when the scale value is reached during setting, then a second audible and noticeable trigger when the set torque is reached in use. A Speed Release mechanism makes the adjustment quick and safe.
Eleven bits and six Zyklop sockets
Six TORX bits from TX 15 to TX 40, four hex bits from 3 to 6 mm and a PH 2 Phillips bit cover most small-fastener heads, while 8790 HMA Zyklop sockets in 6, 7, 8, 10, 12 and 13 mm handle hex nuts. A 75 mm extension with a free-turning sleeve reaches recessed fixings.
45-tooth reversible ratchet in a compact box
The reversible 45-tooth ratchet runs the fastener down and then applies the measured value without a tool change. Everything travels in a robust, surface-protecting textile box that docks with the Wera 2go system.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Low-range torque is where the money actually gets saved. A stripped 4 mm thread in an alloy casting or a cracked carbon seat clamp costs more than the wrench, and both happen at values under 15 Nm where hand feel is useless. Wera pairs a plus or minus 4 percent wrench with the bits and sockets that fit those fasteners, which is the reason to buy the set rather than the bare tool. Two details are worth knowing before you order: the wrench is a 1/4 inch hex drive with a square adaptor supplied rather than a square-drive wrench, and the socket run skips 9 and 11 mm. Neither is a problem, but both are wrongly described in most listings. Browse our Cable Tools and Testers range for the rest of the hand-tool line-up, or the wider Cables and Accessories section for installation material.
Buyer’s Guide
Buy it if
You tighten small fasteners with a printed torque value between 2.5 and 25 Nm on bicycles, electronics, appliances or machinery and want the bits and sockets matched to the wrench.
Skip it if
You need 40 Nm and above for wheel bolts and chassis work, you need a supplied calibration certificate, or you need 9 or 11 mm sockets.
Also consider
The Wera Click-Torque C 3 at 40 to 200 Nm for wheel and chassis fasteners, or the Wera Kraftform Kompakt VDE 16 Torque set at 1.2 to 3.0 Nm for insulated torque work on terminals.
Features - Wera - 05130110001
More Details
Product Code
04:494267
EAN Code
4013288205643
Manufacturer
Wera