Wera Kraftform Kompakt Stubby Magazine RA 4 Ratchet Screwdriver 6 Bits Phillips Slotted Square-Plus
Brand:
Wera
Wera Kraftform Kompakt Stubby Magazine RA 4 Ratchet Screwdriver 6 Bits Phillips Slotted Square-Plus
€43.11 inc. VAT
05008893001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Wera Kraftform Kompakt Stubby Magazine RA 4 — 6 Bits
Stubby Ratchet Driver9° Return AngleSwivelling Bit MagazineRing Switch with 0 Position
The Kraftform Kompakt Stubby magazine RA 4 is a ratcheting bit driver with no blade at all: the bit mounts straight into the head, so the whole tool is short enough to work where nothing longer will fit. Six bits — Phillips PH 1 and PH 2, slotted 1 x 5.5 and 1.2 x 6.5, and Square-Plus #1 and #2 — live in a swivelling magazine built into the handle. A fine-toothed ratchet gives a 9° return angle, and the ring switch works the way you expect: turn it clockwise for clockwise driving, the other way to reverse, or set it to 0 to deactivate the ratchet and drive rigidly. A strong permanent magnet holds the bit in the short mount. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
Wera counts only the six bits — the handle, ratchet and magazine are the carrier tool and are not in the count. Because there is no blade, the tool cannot reach a recessed fastener at all: it is a short-access driver, not a general one. Profile coverage is Phillips, slotted and Square-Plus only — no TORX and no hex. The magazine holds exactly six, so it is full as supplied. Not insulated, not VDE-approved, not impact-rated. Check the article number when comparing prices: the older 05008886001 has the same product name but is discontinued; this is the current version, EAN 4013288233950, 155 g.
Best For
✓ Cabinets, engine bays and appliance interiors
✓ Work where a normal driver cannot be swung
✓ Bag and toolbox carry
✓ Square-Plus and Robertson hardware
Key Features
No Blade, Maximum Short Access
The bit mounts directly in the head, so the tool is as short as a ratcheting driver can be. That is the entire design brief — it goes where a driver with any blade at all cannot enter.
Swivelling Six-Bit Magazine
A magazine built into the handle swivels open to give the six bits and holds them securely when closed, so the driver arrives complete with nothing loose to lose in a cabinet.
Ring Switch with a 0 Position
Turn the ring clockwise and the ratchet drives clockwise; turn it the other way and it reverses. The 0 position deactivates the ratchet so the tool works rigidly for precise work and final tightening.
9 Degree Return Angle
A fine-toothed ratchet needing only a 9° swing to pick up the next tooth, plus free spinning when the screw offers no resistance — which matters most in exactly the cramped spaces this tool is made for.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
There is a specific job this tool exists for: the screw you can see, can reach with a fingertip, and cannot get any normal driver onto. No blade at all is an unusual answer and it works, but be honest about the cost — anything down a recess is out of reach entirely, so this lives alongside a normal driver rather than replacing one. The 0 position is worth knowing about too: in a tight space a ratchet is fast, but the last quarter turn is better done rigid. Browse our Cable Tools - Testers category for more Wera hand tools, or the wider Cables range for related workshop supplies.
Buyer’s Guide
Buy it if
You regularly meet screws in spaces too tight for a normal driver and want a ratchet with six bits stored inside it.
Skip it if
You need to reach recessed fasteners, want TORX or hex bits, or need a torsion zone or an impact rating.
Also consider
The Kraftform Kompakt 27 RA 1 (05051517001) for a full-length ratcheting driver with BiTorsion bits, or the Kompakt 28 RA 1 (05051519001) for a telescopic blade.
Features - Wera - 05008893001
More Details
Product Code
04:545012
EAN Code
4013288233950
Manufacturer
Wera