Zebra Z-Ultimate 3000T Thermal Transfer Polyester Labels 12.7 x 25.4 mm, 12 Rolls x 9,449, Gloss White

The Zebra Z-Ultimate 3000T 880328-012 is 12 rolls of 9,449 12.7 x 25.4 mm gloss white polyester thermal-transfer labels for Zebra industrial printers, made for labels that have to survive heat, abrasion, moisture and chemicals.

It is genuine Zebra media: the facestock, adhesive and liner are matched to Zebra resin ribbons, so you get sharp small text and barcodes that stay readable through handling, cleaning and temperature cycling. Typical jobs are asset tags, rating plates, sterile-services labels, PCB and electronics labels, parts exposed to water, friction or chemicals.

• 12 rolls of Zebra Z-Ultimate 3000T labels, 12.7 x 25.4 mm, 9,449 labels per roll
• Labels supplied on a glassine liner, wound for Zebra industrial printers
• No ribbon, no printer and no core adapter included

• Each label is 12.7 x 25.4 mm (0.50 x 1.00 in): set this size in the driver or ZebraDesigner before the first print, then run media calibration
• This is thermal-transfer stock: the image comes from the ribbon, so you need a resin ribbon loaded — Zebra 4800, 5095 or 5100 resin ribbon (5100 for harsh chemicals)
• A polyester facestock with a permanent acrylic adhesive is meant to stay on the item: it does not peel off cleanly once cured
• Service range -40 °C to +150 °C; apply at or above 2 °C on a clean, dry surface for full adhesion
• Typical use: asset tags, rating plates, sterile-services labels, PCB and electronics labels, parts exposed to water, friction or chemicals

• Direct-thermal-only printers (no ribbon) — this material will not image without a ribbon
• Wax ribbons — they will not give the scratch and chemical resistance this polyester is chosen for; use resin
• Current Zebra desktop printers (GK, GX, ZD series) that take only small-core rolls: this roll is an industrial format
• Inkjet or laser printers — these are roll labels for thermal printers only