Zebra ZD411d 2-inch Direct Thermal Desktop Label Printer, 300 dpi, 102 mm/s, USB, USB Host & Bluetooth LE, Black

The Zebra ZD411d is a 2-inch desktop label printer that prints by direct thermal at 300 dpi and up to 102 mm/s (4 ips), made for product, price and small shelf labels, specimen and asset labels, and narrow receipts up to about 60 mm wide.

It connects over USB 2.0, USB Host, Bluetooth Low Energy (setup). As a Zebra printer it runs ZPL II and EPL natively, so courier integrations, ERP templates and existing Zebra label formats work without emulation. It is a compact, single-user or workgroup printer for counters, packing benches, back offices and small warehouses rather than a 24/7 industrial line printer.

In practice it sits between a PC or POS terminal and a roll of labels: you design labels in label software such as BarTender, or print them straight from your ERP, WMS, e-shop back office or courier portal. Label size, gap and darkness are set once in the driver or by a quick media calibration, and after that every print lands in the same place on the label.

• Zebra ZD411d printer
• External power supply with EU and UK power cords
• USB cable
• Quick start guide

• Labels from 15–60 mm wide on rolls up to 127 mm outside diameter — typical 25 to 58 mm product labels and 58 mm receipt rolls fit; 100 mm shipping labels do not.
• At up to 102 mm/s (4 ips) a 50 mm long label prints in roughly 0.5 seconds, so batches of a few hundred labels are a matter of minutes.
• With USB 2.0, USB Host, Bluetooth Low Energy (setup) only, it prints from the PC it is cabled to; to use it from several PCs, share it from that PC or choose the network version.
• No ribbon to buy or change: running cost is the labels only, and loading a new roll takes seconds.

• Media wider than 60 mm or rolls larger than 127 mm outside diameter.
• Ribbons and thermal transfer-only labels — this model has no ribbon mechanism.
• Colour printing, photos or ordinary A4 office printing — it prints one colour (black) on label media.
• Wireless printing from phones out of the box — the built-in Bluetooth LE is for setup with Zebra's app; add the Wi-Fi/Bluetooth module for wireless printing.