APC Back-UPS Pro 650VA 390W Line-Interactive Tower UPS with AVR and LCD, 6x IEC C13, USB, User-Replaceable Battery, Black | EU Schuko + IEC Outlets
Μάρκα:
APC
APC Back-UPS Pro 650VA 390W Line-Interactive Tower UPS with AVR and LCD, 6x IEC C13, USB, User-Replaceable Battery, Black | EU Schuko + IEC Outlets
€316.24 inc. VAT
BR650MI
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
APC Back-UPS Pro 650VA (BR650MI) — 390W Line-Interactive UPS with AVR, LCD and IEC Outlets
650VA / 390WLine-interactive with AVR6x IEC C13LCD + USB
The APC Back-UPS Pro BR650MI is a 650VA / 390W line-interactive tower UPS for a desktop PC, home-office equipment or a small network setup. Automatic voltage regulation corrects sags and over-voltage without switching to battery, and a multifunction LCD shows load, battery and input status.
Six IEC C13 outlets suit computers, monitors and network devices with standard detachable cords. Over USB, the UPS reports to the operating system so the PC can shut down automatically when the battery runs low, and the battery can be replaced by the user when it reaches end of life.
Before you order: All outlets are IEC C13, not UK or Schuko sockets — equipment needs C14-ended cords. APC does not publish the split between battery-backed and surge-only outlets in the datasheet, so check the labels on the rear panel before plugging in critical equipment.
What's in the Box
- APC Back-UPS Pro BR650MI with battery installed
- User documentation
- APC does not publish a full contents list for this model — ask us if you need IEC cords or a USB cable and we will confirm
What It Means in Practice
- 390W of real capacity: a typical office PC with monitor, or a router, switch and NAS together.
- Output on battery is a stepped approximation to a sine wave — fine for most PCs; for active-PFC workstations choose a pure sine-wave model.
- Transfer time is 10 ms typical, 12 ms maximum.
- After a full discharge the battery takes around 12 hours to recharge fully per APC.
- The battery is user-replaceable — the UPS itself can stay in service for years.
What Will Not Work
- UK BS1363 or Schuko plugs do not fit the IEC C13 outlets — use C14 cords.
- Some active-PFC power supplies may not run reliably on the stepped-sine output.
- No external battery packs — runtime cannot be extended.
- Laser printers, heaters and other high-inrush loads must not be connected.
Key Features
AVR line-interactive
Corrects voltage fluctuations without using the battery, over a 176–294V input range.
Multifunction LCD
Shows load, runtime and status information.
Six IEC C13 outlets
Clean cabling with standard computer power cords.
User-replaceable battery
Extends the service life of the UPS.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
The BR650MI is a dependable APC unit for one workstation or a small network corner, with the AVR and LCD that budget UPSs skip. Use C13 cords and check which outlets are battery-backed. For the network side of your desk, see our routers.
✓ Buy it if you need AVR backup for a PC or network devices under 390W with tidy IEC cabling.
✕ Skip it if your devices only have UK plugs or your PC uses an active-PFC power supply.
→ Also consider APC Back-UPS 500 (BE500G2-UK) for UK sockets, or Eaton 5SC 500i for pure sine wave.
Tell us the devices you want to protect and we will confirm runtime and cables before you order.
Colour
black
Χαρακτηριστικά
Product Code
03:280423
EAN Code
0731304346937
Manufacturer
APC