DIGITUS 1U Lockable Drawer for 19-inch Network and Server Cabinets, 25 kg Load, 398-732 mm Mounting Depth, Black

The DIGITUS DN-19 KEY-1U-SW is a 1U lockable drawer for 19-inch network and server cabinets, rated for 25 kg with 31 mm of inner height, for keeping documentation, keyboards, spare cables, SFPs and small tools locked inside the rack where they are needed.

Digitus describes it as a lockable document holder or keyboard tray. It fixes at four points to the front and rear 19-inch profiles, with rear brackets that adjust to installation depths from 398 mm to 732.5 mm, and pulls out to 660 mm fully extended. It has a front handle, a key lock and a cable entry at the rear.

• 1 × 1U drawer
• 1 × handle
• 1 × key
• Installation set: screws, cage nuts and washers

• 31 mm inside height — enough for a slim keyboard, labels, patch cords and documents.
• Lockable: keeps spares and paperwork secure in shared comms rooms.
• Rear cable entry lets you run a keyboard or console cable into the drawer.
• Adjustable rear brackets fit most 600, 800 and 1000 mm deep cabinets within the 398–732.5 mm range.

• 2-post racks and open wall brackets without rear profiles.
• Loads above 25 kg.
• 10-inch or 23-inch racks.
• Mounting depths below 398 mm or above 732.5 mm between front and rear profiles.