DIGITUS DN-19 EARTH Potential Equalisation Bar for 19" Cabinets, 220 mm Copper, 6 Points, with Earthing Leads

The DIGITUS DN-19 EARTH is a 220 mm copper potential equalisation bar with six connection points, supplied with four 40 cm earthing leads and M6 mounting material, for bonding the doors, side panels and installed components of a 19" cabinet to a common earth point. DIGITUS lists it as suitable for all DIGITUS 19" cabinets.

Bonding every metal part of a cabinet to the same potential reduces touch-voltage risk and electrical noise on network equipment. The bar gives you one tidy collection point inside the cabinet, from which a single conductor runs to the building's earthing system.

• 1 x 220 mm copper potential equalisation bar (6 connection points)
• 4 x earthing leads, 40 cm
• M6 mounting material

• Gives one central earthing point inside the cabinet for doors, panels and equipment.
• Six connection points cover a typical cabinet with front door, rear door, two side panels and spare points.
• Four leads are included, so the main parts can be bonded straight away.
• Keeps earthing neat instead of daisy-chaining wires between panels.

• Does not connect the cabinet to building earth on its own — a separate earth conductor and electrician are needed.
• DIGITUS only confirms fit for DIGITUS 19" cabinets; other brands may need their own fixing.
• Not an EMC shielding kit or a surge protector.
• Not the long vertical 770/820 mm bar (DN-19 EARTH-L).